20 Most Recent Hamilton Beach 70610 10 Cups Food Processor Questions & Answers

This could be a possible source if the 70610C is same design as the 70610:

http://www.abtecparts.com/proctor_silex_fp_70610C.htm

DYI fix job on mine. DIsassembles base and switch assembly. Added a rectangular piece of plastic just above litlle balck trigger switch. Taped switch casing's side (not my plastic piece) so that my plastic piece would not fallout. Re-assembled. Voil?. Problem was that travel length of whole trigger mechanism was a bit too short to trigger the switch. With the added plastic piece, travel was extended a little to make the whole thing work, but not so much so that it would always unsafely stay ON when plugged. Tried various other gluing options on other pieces before that, but nothing would hold.

Should be a push down and turn counter clockwise to release.

https://www.manualagent.com/hamilton-beach/544-emmie/users-manual/download

the motor is stuck and likely bad

Please understand that you are talking on a public forum to regular people who offer advice, not to the company that made your food processor. Contact the seller or Hamilton Beach directly for parts. https://www.hamiltonbeach.com/support

https://www.hamiltonbeach.com/trucount-12-cup-coffee-maker-45300 There is a use and care guide, but I am not hopeful it will give you any specifics My guess is that it is a LED or florescent display, not an LCD and it has dimmed with age. Several other people complaining of the same, no solutions I have found.

Contact manufacturer they are very helpful. :-)

Ask Hamilton beach or try manualsonline.com

Go to this link to get manual

http://www.hamiltonbeach.com/use-and-care/use-and-care.php

Good luck and please rate fixya!

I just ordered a drive belt from https://www.goodmans.net/ for Hamilton Beach/Proctor Silex Food Processor Type: FP03 Model: 702R for $7.99 + shipping.

Request it directly from Hamilton Beach or Google it.

is it plugged in ?

the problem it would be cheeper to get a new one than to fix the old one now.

Hi, if you were to put the belt on with the teeth facing away from the wheel, are there any sort of cogs for the teeth to connect to? if not, then the belt needs to go on, teeth touching belt, i hope that makes sense

See previous answer. God bless your efforts.