20 Most Recent
JBL GT150 Car Subwoofer - Page 4 Questions & Answers
Without remote wire how to connect to head unit
If your head unit does not have an output for remote amplifier turn on, you can also use the power antenna remote turn on and run that wire to your amp. Or you can run a small 14 gauge wire from your battery along with your amp power wire, just make sure you put an inline switch somewhere in your dash area. This will give you the option when to have your amp on. 14 gauge wire from battery, to switch, from switch to remote turn on at amplifier. Switch will turn on and off amp. Make sure you turn switch OFF whenever you turn car off or you WILL kill your battery.
Red and blue light flash on and off
ITS IN PROTECT MODE. EITHER ITS BLOWN OR THE SUB IS TRYING TO PULL TOO MUCH POWER. UNHOOK THE SUB AND SEE WHAT HAPPENS IF THE LIGHTS STILL BLINK THEN AMP IS BLOWN. IF THEY STOP BLINKING AND ONLY ONE STAYS ON THEN LOWER THE SETTINGS ON THE AMP AND TURN THE BASS AND VOLUME DOWN ON THE DECK TO LOWER THE AMOUNT OF POWER BEING PULLED FROM THE AMP.
Not finding what you are looking for?