Top 20 ESQ 07301132 Aerodyne watch Questions & Answers


1. set time/datepush the pusher at 4:00 for couple second to start setting mode.pusher at 4:00 is to select time/date, pusher at 2:00 is to adjust time/date

2. if off sync between analog and digital clock happen. You need to resyn
step 1: follow the instruction 1 to set digital clock to 12:00.
step 2 : push and hold both pushers at 2:00 and 4:00 for couple second until it shows sync mode.
step 3: once it enter sync mode, you can use pushers at 2:00 and 4:00 to adjust the analog time to 12:00 same as digital.
step 4: push the pusher at 3:00 to exit the sync mode.
step 5: follow the instruction 1 to adjust digital time to correct time. Analog time will adjust it automatically.

ESQ 07301132 ... | 1,055 views | 3 helpful votes


set time/datepush the pusher at 4:00 for couple second to start setting mode.pusher at 4:00 is to select time/date, pusher at 2:00 is to adjust time/date
2. if off sync between analog and digital clock happen. You need to resynstep 1: follow the instruction 1 to set digital clock to 12:00.step 2 : push and hold both pushers at 2:00 and 4:00 for couple second until it shows sync modestep 3: once it enter sync mode, you can use pushers at 2:00 and 4:00 to adjust the analog time to 12:00 same as digital.step 4: push the pusher at 3:00 to exit the sync mode. step 5: follow the instruction 1 to adjust digital time to correct time. Analog time will adjust it automatically.

ESQ 07301132 ... | 1,088 views | 1 helpful votes


1. set time/datepush the pusher at 4:00 for couple second to start setting mode.pusher at 4:00 is to select time/date, pusher at 2:00 is to adjust time/date
2. if off sync between analog and digital clock happen. You need to resynstep 1: follow the instruction 1 to set digital clock to 12:00.step 2 : push and hold both pushers at 2:00 and 4:00 for couple second until it shows sync modestep 3: once it enter sync mode, you can use pushers at 2:00 and 4:00 to adjust the analog time to 12:00 same as digital.step 4: push the pusher at 3:00 to exit the sync mode. step 5: follow the instruction 1 to adjust digital time to correct time. Analog time will adjust it automatically.

ESQ 07301132 ... | 3,227 views | 2 helpful votes


Thank you for contacting FixYa.
I would contact ESQ at the following link:

http://www.esqswiss.com/

Best regards. Jewel

ESQ 07301132 ... | 133 views | 0 helpful votes


this watch needs to be taken in as this is not proper time telling. has the johnson rod been used yet. if not, do so. if so have it taken in and checked with a caver device.

ESQ 07301132 ... | 775 views | 0 helpful votes


It would be difficult to state with certainty, because it wouldn't likely be possible to determine how long the watch was in storage before you received it. Most watches will need batteries between 2-5 years after their manufacture.
Higher-priced watches could easily be that long on the shelf before sale, but I would contact the seller with your complaint. The seller should at least be conscientious enough to ensure the watch is running prior to shipment.

ESQ 07301132 ... | 312 views | 1 helpful votes


i need to remove links from my sons fossil watch how do you do this?

ESQ 07301132 ... | 835 views | 0 helpful votes


Here where we live we have a store that replaces watch batteries. I took mine in and he took the back off and took the old battery out and went to his battery stock and replaced it for me. He did all the work and only charged me three dollars. He has batteries for all makes.

ESQ Watches | 60 views | 0 helpful votes


Sorry we have no information on parts nor do we sell parts.

ESQ Watches | 34 views | 0 helpful votes


go to a jeweler or watch maker as they often have spare links from bands they adjust in shop when making a sale
take the watch in to match the links

ESQ Watches | 168 views | 1 helpful votes


you need to go to a jewelry place, or walmart, you need a special tool called linkage removal tool. it has one job and only one job and thats all it does removes pins and reinstalls pins
it is a very small press, the shaft of the press is about 1/64 inch

ESQ Watches | 35 views | 0 helpful votes


Any watch repair shop will fit new crystal and give real time estimate.

ESQ Watches | 153 views | 3 helpful votes


The best shot you have at finding out what this watch is, would be to take it into a Watch Repair Shop. They have books that identify watches by the make and mode, and I have found information on a lot of rare watches that way. Take the watch in, and they can probably identify it and give you an estimate as to it's value.
Good luck, and hope this helps.

ESQ Watches | 519 views | 1 helpful votes


Need instruction on how to open clasp on Oceania esq watch?

ESQ Watches | 675 views | 0 helpful votes


SEND IT TO ANYTIME WATCH REPAIR. THEY ARE THE BEST!

ESQ Watches | 154 views | 2 helpful votes


fixed by jewelry store. Needed new pin & barrel. thanks

ESQ Watches | 112 views | 0 helpful votes


  • Defective "new" batteries
  • Incorrect installation

Watches | 110 views | 1 helpful votes


English only.

Watches | 331 views | 1 helpful votes


Possibly from Hammacher Schlemmer

Watches | 31 views | 0 helpful votes

Not finding what you are looking for?
ESQ 07301132  Aerodyne watch Logo

24 questions posted

Ask a Question

Usually answered in minutes!

Top ESQ Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Janelle Schoonover
Janelle Schoonover

Level 3 Expert

841 Answers

Norman Worley

Level 3 Expert

1273 Answers

Are you an ESQ Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

ESQ Watches

  • ESQ Watches

Most Popular Question

setting time day date in esq aerodyne

  • Watches
Loading...