20 Most Recent Breadman TR2200C Ultimate Bread Maker - Page 5 Questions & Answers

The manul for the TR2200C can be found here:

http://www.megaheart.com/pdf/breadman_op_manual_TR2200c.pdf

The Breadman website also provides some tips for making gluten-free bread as well as a link to recipes:

http://www.breadman.com/t-gluten-free.aspx

Try to press and hold the program button for 2 to 5 seconds.

I found the part at
Parts & Accessories: 
Phone: 1-800-738-0245 (Monday–Friday, 8:30 a.m. to 8:00 p.m., ET) 
http://www.saltoninc.com/

Use this link:
http://www.creativehomemaking.com/download/Breadman_TR2200C.pdf

Kelly

Go to this FixYa link:
http://www.fixya.com/support/p7476-breadman_tr2200c_ultimate_bread_maker
Under the picture of the breadmaker click on manuals. Then scroll down the page until you see this: Breadman TR2200C Ultimate Bread Maker Manual To the right of that there is a download icon. Click on the icon.. enter the security script NUMBER code and the manual will download via this URL: http://static.fixya.com/Manuals/B/Breadman/_51445DDD7E5B989FAB1DAA2B04E4075B.pdf
(960 kb)
If the above link does not work for you I will get you another link. Just let me know.
Most breadmakers wil knead the contents... add a little heat for the dough to rise and rest for a period before actually baking. If your not getting any heat there may be a problem with the breadmaker.

Thaks for choosing FixYa,
Kelly

Don't toss it yet!!! Can you email me the recipe you are following? Also include the type of flour you are using.....all purpose, bread flour, etc. and the type of yeast.

[email protected]

Often if you hold down the start button for a few seconds the display will go blank and reset itself.

You should be able to purchase a replacement pan here:

http://www.directpartsandproducts.com/bread-makers-tr2200c-c-837_838_841.html

reach in with your fingers and bend the two little clips out a little until they grip your pan snugly. Start with 1/4 " and try that. If it doesn't feel snug go another 1/4 inch.... and so on....

The synthetic seal around the shaft which DRIVES the paddle is fried.
I need a replacement to fit on the shaft OR if necessary 2 new shafts with NEW seals

Bread machine recipe books are interchangeable as long as you make the loaf sizes your machine requires. I have many for sale if you are interested email me at [email protected]

Bread my pan pops out

reach in with your fingers and bend the two little clips out a little until they grip your pan snugly. Start with 1/4 " and try that. If it doesn't feel snug go another 1/4 inch.... and so on....

do you mean the bread kneeder that fis in the bottom of the bread pan if so you can purchase this from amazon £6.05 type in the serch box at amazon bread maker parts

Hi and welcome to FixYa, I an Kelly.

This can be caused by a few things.
1. Check the bread kneading paddle(s). Make sure that it fits properly and is not slipping on the drive shaft. Also look for cracks in the paddle blade hub.

2. Check the bread pan coupler and drive pan bearings (link is a picture reference only of a USED part. http://cgi.ebay.com/Breadman-bread-machine-TR2200-Parts-Coupler-/200535459633?pt=Small_Kitchen_Appliances_US&hash=item2eb0d84731 (klunking sound usually noted if this part has failed)

3. Inside the bottom of the unit check the belt tensioner. (Picture reference only!)
http://cgi.ebay.com/Breadman-bread-machine-TR2200-Part-Belt-Tensioner-/200535465293?pt=Small_Kitchen_Appliances_US&hash=item2eb0d85d4d
Usually if there is a belt or tensioner problem you will note a lot of rubber pieces in the bottom of the unit.

Thanks for choosing FixYa,
Kelly

FixYa has the manual on this website, go to:- www.fixya.com > ... > TR2200C Ultimate Bread Maker

Hi,
It could be the belt has fallen off the pulley or has snapped. The belt, pulley and motor are located inside the base of the machine. Hank

ebay or www.breadman.com

www.breadman.com

fil the pan with boiling water and let it sit for about 20 mins, it should come out after that.