20 Most Recent Dynamode (R-ADSL-C4-W) Wireless Router Questions & Answers

Hi,

Make sure that the cables are connected properly at the back of the router and also reset the modem too by unplugging it at the mains leave it for 2 minutes and then turn it on again, wait for 2 minutes and then try again. Also restart your PC while you are waiting.


Please let me know how you get on.

Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. . Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.

You need to log into the wireless router either by a computer that successfully connects wirelessly or by physically connecting with an ethernet cable. Once connected, log into the router by open a web browser (Internet Explorer, Mozilla Firefox, Google Chrome, Apple Safari), and typing the router's address (usually 192.168.1.1 or 192.168.0.1) into the Address (or URL) line. The default usernameand password is usually "admin" & "admin" or "admin" & "password". Once successfully logged in, look for a tab or link that says "Wireless" or "Security". You'll be able to change whether security is enabled or disabled, and the password associated with it. Your security options are WEP or WPA (or WPA-PSK). WPA-PSK is the most secure, but WEP is also an acceptable choice. Select the security option of your choice and either enter text into the passphrase generator or choose your own password and type it into one of the security key text fields. If you use a password that is not a plain english combination of letters and numbers, be sure to write it down so that you can enter it as needed on other wireless devices that need to access your router (ie-pda phones, game consoles, laptops, desktops, etc). Be sure to save changes so that the security settings and password is saved.
Let me know how you make out.

To secure your wireless network from unauthorized access, you need to at least configure the wireless router with encryption, and the SSID, and change the router's default login password.
Please follow these instructions :-

To connect to your wireless router, it needs the router’s wireless settings configured and also needs the wireless cards in all the laptops and or computers to be configured with the router’s wireless settings. Then the laptops and desktop computers can communicate with your wireless router.

To set-up and secure the wireless router from unauthorized access, follow these steps: -
1. Connect the wireless router to your computer with a LAN cable.
2. Start your browser and enter the router's configuration URL IP address.
3. Enter the router setup, login and password
4. Change the admin password
5. Go to the wireless settings and change the default SSID and turn off SSID broadcast.
6. Setup encryption key the strongest is WPA2 (if not then WPA). The encryption key can be easily set up using a passphrase (it can be an alpha numeric phrase or words).
7. For further security measures - turn on MAC address filtering and enter the MAC address of the wireless cards on the computer/s you want to connect to this wireless router.
8. Record the settings you have made and keep it in a safe place and Save the settings.
9. Configure the wireless cards on the computer/s with the SSID and encryption settings of the router.
10. Remove the LAN cable between the router and the computer then the computers should be able to connect to the router wirelessly.
To access the Internet you need to connect the DSL or cable modem to the WAN (Internet) port on the wireless router.

You will need to check the wireless settings of the router
is there any computer connected to the router ?
If yes then you can open the router set up page on that computer.
Router set up page is the page where you can check all the wireless settings of the router.
Click here for step by step instructions

yes u can still do it and please do it asap.

go to wireless setup select wireless security / encription / select the type / put i n a password and save it.. ur done

Are yo trying to connect to the wireless network on the laptop /
If it is then make sure that the laptop is connected to the network.
Click Here for more info on networking

You need to change the wireless security mode.

Have you got your manual still?

Is this a Secure network? Or public?

You need to power cycle the network to syncronize the connection. You have to turn off the router and modem for 5 minutes and turn it back on. Make sure that the lights on the modem are steady before you trun on the router.

Hi there. You may need to connect to the wireless network manually. What is the operating system running on your computer? If XP, you may follow these. (This is also applicable in other operating system, it may just vary a little) Right click the monitor icon showing on the system tray near the clock. Point the mouse in the icon and it will display the name if it is wireless network connection or network connection. Right click the icon and look for view available wireless network. If it is not showing, look for network connection. Right click and select "open network connection". Right click wireless network connection and select "view available wireless network" . Look for the wireless network you're trying to access or have connection.Highlight and click connect. If encrypted, you need to supply the pass key or security key twice and hit connect. It should allow you now to go online wirelessly. Please remember these, you should be able to go online wired. Make sure that there are other wireless computer connected to the wireless network you're connecting with and can go online wirelessly.

Hope this help :)

Reset the router to factory default, this way you can put in a new password and WEP.
**On the vast majority of routers the reset button is found either on the back plate or on the underside of the router. The reset button is on the rear of your router

**The reset button is YES! a TINY tiny little hole no bigger than a pencil point or full stop. You can easily miss it, to perform a reset you will need a paper clip or pin.

TO RESET, using the paper clip straightened out, push the end of the paper clip into the tiny hole, and push it firmly until you feel a resistance. hold the paper clip, & push & hold in the reset button for 20 -25 seconds (with the power turned on). after you have done this power off and power back on the router.

Now! the router should have all its original factory default settings, as if you just took it out of the box for the first time:so you should be able to get to the setup page and set the WEP encryption.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe
I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

click on the little icon in the lower right corner that lookes like a red x with computer by it. when screen shows up double click refresh network icon then pick your router what ever you named it. hope help you .

enter the routers' ip in IE and go to setup wizard

Hi, Have you succeeded?