20 Most Recent
La Crosse Lacrosse WT-5120U-BP Projection Alarm Clock - Page 3 Questions & Answers
No sound sanyo preamp a8
Is this a new rig or did it just stop working?
If you would elaborate a bit on what you're doing and how it's connected we might be able to solve your problem with high level information.
A list of equipment, including the amplifier you're using, would help.
In general...
If there is a Pre Amp Out stero pair that would go the Amplifier's Pre or Main IN pair.
If there's is a Tape Monitor control, turn it off.
Phono can go ONLY to phono.
Other stereo devices can go to just about anything avalable such as Tuner, Aux, CD, DVD.
Philips HTS8100/59 very low audio
Hi, It could be that you have the wrong omes 4 omes instead of 8. That means the amp has to put out more power to run those speakers. Check that you have the right omes. Good luck
My Pure Sonus 1Xt will not work
I thought my Pure Sonus 1XT was knackered as it would only show a blank blue screen and not respond to the buttons.
But by trial and error I found that if I disconnected it from the mains power supply for TWO WEEKS (one week was not enough) it would restart correctly, and would stay ok so long as I did not disconnect from the supply, and so I used only the standby button to switch off. If I did disconnect, it meant another two week wait.
No idea why this works. Mine did have a faulty power supply at one time (genuine Pure) which left 15v on the supply, rather than the 9v that it should be.
Worth a try before you take it for recycling.
Beresford.
Hyundai getz radio security code
When you disconnect your battery and then reconnect it
again, it disables the radio. This is an anti-theft protection for your car
radio.
The enable your radio the activation code is in your vehicle owner's manual. If
you do not have this code you need to go to your Hyundai service
centre and get them to enter this code for you.
Not finding what you are looking for?