Thermos Grill2Go Gas Grill 4656110 - Answered Questions & Fixed issues

Thermos 465611003 Owner Manual Lp liquefied Petroleum Gas Grill Service...

I have the same problem. Were you able to find the stand?

I bought this to replace the regulator I lost for my Thermos Grill2Go. Little modification to the grill and it worked like a champ. Portable Propane Table Top Regulator 1 by 20 Female Throwaway Cylinder...

e parts has a regulator that will work for 27.95, you just have to grind a small flat spot on the outer edges of the fitting,180 degrees across from each other to get it to fit.

low heat and having the vents just slightly open lowers heat the more air flow the hotter the fire

Has your grill always done this or is it something that recently has started. If this is the first time there might be a difference between the BTU ratings of each burner.

Unfortunately, the part you're looking for, as well as your model grill are no longer available from the manufacturer or from after market grill parts dealers.

I'm sorry. I wish I had better news for you. Thanks for choosing FixYa.

Herb, here is a link to the Owner's Manual for your grill. You can download and print it for future reference. http://www.appliancefactoryparts.com/content/pdfs/132220.pdf
It should assist you and answer your questions.

Thanks for choosing FixYa.

Hook up the propane tank and open the valve. Then turn whichever valve is the starter to start/high. Hit the igniter and it should start.

http://www.charbroil.com/Parts/414/Grill2Go.aspx#AllParts

Here is a link to a list of all the parts that make up a Thermos Grill2go. You can order the parts from the website, or use the part numbers to order direct from Thermos.

Mike, your gas regulator is locked up. To solve the problem, do the following.

1. Turn the tank valve OFF and disconnect the hose from the tank.

2. Wait 5 minutes and reconnect the hose to the tank.

3. Open the tank valve VERY, VERY SLOWLY (Slow motion, slow) until the valve is fully open.

4. Light on burner and turn it to HIGH. Does the flame height look correct? If so, light the other
burner the exact same way. Do both flame heights look correct? If so, you solved the problem.

In the future, always remember to turn the tank valve ON very, very slowly.

If the above didn't solve the problem. You will need to replace the grill's Hose/Regulator Assembly. You can pick one up from any hardware store or home center that sells gas grills & accessories for about $30.00. Take you old one with you for comparison purposes.

Hope this helped you to troubleshoot and solve the problem. Happy Grilling!!

Barry, unfortunately, the part # CHR63604730520, you're looking for is no longer available.

Wish I had better news for you.

Not usre why you couldn't print the manual (printer problems?) but short of providing an link to the Owner's Manual and the Assembly Manual., the only thing left to do is provide you with the telephone number for Char-Broil (they are the manufacturer) Customer Support: 1-866-239-6777

Owner's Manual
http://www.charbroil.com/bps/char-broil/char-broil/knowledge/grill2go-va%20manual%20-%20english%20-%20040303.pdf

Assembly Manual
http://www.charbroil.com/bps/char-broil/char-broil/knowledge/4656110-6213-e.pdf

I hope this helps you. Please let me know. Thanks.

i have lost the connector to my grill burner

HI,

I will advice you check ebay.com or ereplacementparts.com, these are two good places to get parts

Often the problem is pretty simple. I forget to turn off the control knobs when turning on the propane. This triggers the new safety mechanism in the regulators that restricts the gas flow. To re-set, disconnect everything, then reconnect with all knobs in the off position. Turn on the propane at the tank to "pressurize" the system. Sometimes I have to do it twice to get it to work right! If not - I'd suggest you contact customer support at Char-Broil (they make it) and get some tips.

try canadian tire

it sounds like the reg off the gas bottle or blocked burner

http://www.appliancefactoryparts.com/gasgrillparts/brands/thermos/thermos-plumbing-valves.html

Check the orifice, they are the culprit most of the time. Be careful when cleaning the orifice its a small hole and you do not want to enlarge it.