Top 20
Kenmore 12-Cup Coffee Grinder and Brewer, Stainless Steel Questions & Answers
I purchased a Kenmore Elite Coffee maker last year and now water is leaking from the bottom. I noticed it has a five year warranty on it . how do I go about getting it replaced or repaired?
Claim using this phone number. It says 2 years warranty, but the product link does say 5 years.
WARRANTY SERVICE
To obtain the warranty coverage stated below, return defective product with proof of original sale to Kenmore (Transformco) authorized retailer from which it was purchased. Call this number to obtain the warranty coverage stated below: 1-800-265-8456
KENMORE LIMITED WARRANTY
FOR TWO YEARS from the date of original sale this appliance is warranted against defects in material or workmanship when it is correctly installed, operated and maintained according to all supplied instructions.
WITH PROOF OF ORIGINAL SALE a defective appliance will be replaced free of charge. If replacement is not available, the retailer will provide item price credit usable for other purchases from that retailer.
This warranty does not cover expendable parts that can wear out from normal use within the warranty period.
This warranty is void if this appliance is ever used for other than private household purposes.
Kenmore Elite Brew Coffee Maker with Burr Grinder
Koolatron
https://www.koolatron.com > en-ca > products > kenm...
Kenmore Elite Grind and Brew Coffee Maker ; Power Type, 120 Volt ; Product Weight, 11.50 lbs (5.29 kg) ; Color, Silver, Black ; Warranty,
5 year limited warranty.
$319.00 · In stock
Kenmore Elite Programmable Coffee Maker ' 12-cup
Koolatron
https://www.koolatron.com > products > kenmore-elite...
Best of all, Kenmore Elite products are backed by a
5-year limited warranty for your peace of mind.
I am looking for a
If anyone is looking for the Kenmore Coffee Water Filter model 69768 - Sears / Kmart re-branded the filter under the Cuisinart name making them near impossible to find under the Kenmore name. HERE is the link to order them under the Cuisinart name at SEARS (its the EXACT same filter and they come 2 to a pack)
http://www.sears.com/shc/s/p_10153_12605_00869768000P
My kenmore 12 - cup coffeemaker, model # 80666 is
In the manual that came with the coffee maker, the beeping is the freshness alert. When coffee is finished brewing it beeps 5 times. Every 15 minutes it beeps to let you know your coffee is 15 minutes less fresh! I just purchased this coffee maker and was looking on here how to dis-assemble the beeper. Whomever came up with the "freshness beeper" on a coffee pot needs a new job! Usually when I make coffee the whole house is asleep, now the beeping is waking everyone up! Very frustrated with this coffee pot!
Replacement pot for a Kenmore TSK-196B coffee maker
Times change but I find that even after they don't carry something any more their parts store still carries most of the parts to repair things , try calling your local store for the parts store Number and give them a call if they don't have it usually they can and will order it and sometimes even send it to you! Good Luck
Clogged up filter
i'm not familiar with this machine but i think most espresso/capuccino machines' brewhead screen (that's what i call the screen your concerned about) are held in place by a screw in the middle. with machine unplugged & cooled down, remove the screw and take out the screen. if the buildup is really bad, you can scrub as much off as possible w/ hot water & soap, then hold it up between your face and a light (see light thru the holes?) any stubborn holes can be cleared with a pen or needle; you may need to wiggle the needle/pen inside each hole to clear it fully; this is time consuming so you may elect to use a decalcifier (i use 1/2 water and 1/2 lemon juice concentrate-pulp-free, in a small container w/ brew-head screen overnight, then scrub real well & wash again next am). hope this helps!
Stopped working?
All coffee-makers are provided with a thermal fuse located near the heating element and in series with the element itself.
This device is bullet-shaped with one lead connected to the case, the other insulated from it.
If there was no protection of this kind, it could lead to a fire if the heating element fails to get turned off when reaching its design temperature and nearly impossible to buy as replacement parts.
These are not user replaceable and both the thermal fuse and the bimetal switch that controls the current for the heating element have become increasingly less reliable as they are made in China and since we have little alternative, we have to either keep track of our warranty or just throw it away when it fails.
The fuses can fail at any time and I have brought back three coffee-makers in a five day period, all with the same failure, before giving up and getting a refund.
Another type of failure, namely of the bimetal switch occurs over time and reveals itself by the ever-longer brew time that is unaffected by dissolving the lime in the system.
The heat sensitive metal switch part becomes gradually less responsive causing the machine to just cough instead of pump as when new.
The last one I tossed had reached 40+ minutes per pot.
Schaerer SCP is not rinsing correctly
Check the Operating Temperature:
Ensure that the machine has reached the correct operating temperature. If it hasn't, the indicator light will be on. Wait until the machine is fully heated before proceeding.
Check for Ongoing Programs:
If a rinse or cleaning program is currently in progress, the cleaning button may be flashing. Wait for any ongoing programs to complete before trying to brew coffee.
Inspect the Brewing Unit:
Make sure the brewing unit is properly seated and not obstructed. The brew group should be in the correct position.
If the brew group overflows, it could be due to a blockage or misalignment. Remove the brew group, clean it thoroughly, and reinsert it properly.
Inspect the Coffee Spout and Drainage Area:
Check the coffee spout for any clogs or blockages. Clean it if necessary.
Examine the drainage area at the bottom of the machine. If water is running away onto the floor, there may be a leak. Inspect the drip tray and other components for leaks or damage.
Refer to the Operating Manual:
Consult the operating instructions manual for your Schaerer Coffee Club machine. If the above do not resolve your issues, you may have to contact Schaerer Services.
Not finding what you are looking for?