20 Most Recent Plantronics Explorer 220 Bluetooth Headset Wireless Headset - Page 3 Questions & Answers

to pair your bluetooth first, turn the bluetooth feature on your phone to on.
Next, hold the call button on your bluetooth until the light begins flashing blue and red, this means it it in paring mode.
Third, find the 2XXplantronics device in your bluetooth options. Select this divice and enter the passcode (0000).
You are now finished and the bluetooth is paired.

Just this morning I was able to pair this headset with my phone. Before, it was paired to my PS3. The key is to hold down the big round button on the outside until the light flashes red/blue (this is quick-pair mode) then just have your cellphone search for bluetooth devices and you're done!

Default pass keys for Bluetooth headsets are usually the following:00001234

I had that problem too. I finally realized that I had to press the enter key on my phone.

hold the power button down untill it starts to flash red then run blu tooth detect

I would try deleting the headset from your phone. Do a re pair or subscribe to your phone. I am sending you a Plantronic user guide for the Explorer 220.

Good luck from Headsets Direct!

is bluetooth available on the 2006 cadillac escalade

Start with the device off but fully charged. Press and hold the call control button for 8 seconds; at this point, you'll see the light flash blue then red. You'll have two minutes to connect it to your new phone. Use the passkey 0000 after your phone finds the headset.

Try to put your headset in pairing mode, prior to trying to pair it with your phone. To do it, begin with it turned off. Then, if it is the first time it is being paired ever, just by turning it on (i.e. by pressing and holding the call button for some 2 seconds), it should enter the pairing mode. Otherwise, keep holding the call button past the turning on phase (a total of some 8 to 10 seconds), until its indicator light is flashing in red and blue, thus indicating it is in pairing mode. Either way within the next 2 minutes, make your phone's bluetooth application search for new devices. After a little while, your headset should appear on-screen. Select it and make it connect. If a pairing code (or passkey, or PIN) is requested, enter '0000' (four zeros). If the pairing process is successful, your headset should enter the stand-by mode. By the way, if its data sheet happens to be missing, feel free to download it from this location.Really hope you are able to sort your problems out soon.Anyway, please, let me know if I can help you any further . Regards, Carlos

You seem to have asked this question more than once. Anyway, pairing codes for bluetooth headsets are hardcoded. Take a look atthese generic tips. Hope they might suit your needs.Anyway, please, let me know if you need further informations.Regards,Carlos