20 Most Recent Just Wireless Bluetooth Headset Wireless Headset - Page 5 Questions & Answers

You need to make sure your wireless function is turned on, on your phone. Look under settings and tools go to add new device. You also need to place your headset in discovery mode. read the directions that came with the headset it will tell you how to do that.

you have to press the on button while pressing the volume up button, the password will be 0000

How long have you used this bluetooth device?...For if this is already a yera or more, then probably the its rechrgeable battery is already worn out and must be replaced. If not you need to dheck its mounting if it somewhat loose or damage.

ur just a ********..haha nah jk
i got the same problem. help...

I just had the same issue and I put in 1234 for the password and it connect.

to setup your bluetooth you will need to go to the phone settings, look for anything that deals with connectivity, once you find it you will see the bluetooth option, click ON then you will need to scroll down till you see search for devices. Turn on the bluetooth devise before searching for devices. The cell will automatically search, once it finds the devise it will ask or show all the devices in the area, look for your equipment, pair it and Voila!! Hope this was helpful

Good Luck =)

Wiring a fridge thermostat typically involves connecting the thermostat to the power source and the compressor. Here's a general guide for wiring a 3-pin thermostat:

1. Identify the Pins: The thermostat will typically have three pins labeled 4, 6, and 3.
2. Connect the Power Source: Pin 4 is usually the common (C) terminal, which connects to the power source. This could be the live wire from your electrical supply.
3. Connect the Compressor: Pin 6 is often the normally open (NO) terminal, which connects to the compressor. This allows power to flow to the compressor when the temperature rises above the set threshold.
4. Ground Connection: Pin 3 is commonly the ground (GND) terminal. This should be connected to the ground wire for safety purposes.

I recommend RadioReference.com, they have detailed lists from all over the United States. In addition to frequency lists, they also include live audio, HAM radio lists, licensing information and a lot more.

I have the same problem. When o remove the interface the led is not flashing as per the instruction manual

http://www.manuals.group/results.php?search=TRONIC%20PLL%202023%20KURZ

Home - SONOFF OfficialSONOFF Official https://sonoff.tech Explore the innovative world of SONOFF, learn and chose about various smart home products, define your smart home,your smart choice!‎SONOFF Products · ‎Basicr2 · ‎ZigBee Bridge · ‎Home AUTOMATIONA Thorough Pairing Guide To SONOFF Smart Devices And ...SONOFF Official https://sonoff.tech > product-review > tutorial > how-to-p... How to quickly pair sonoff smart devices with ewelink app? This guide covers a complete and instuitive pairing instruction for all sonoff devices.Contact maker support. It is likely an issue with the new broadband router. The will know if there are compatibility issues..

All questions need FULL 'make model (what it is) first 3 words please. Something to do with this? The serial number should on the label on the rear by the mains cable. This is a statutory requirement unless someone removed it to hide its identity. https://www.google.com/search?q=KPG-790 ..

There are some ideas here, but also make sure Squelch isn't all the way up, that you aren't on some type of mute and that the Volume isn't at Zero. https://www.google.com/search?q=two-way+radio+transmits+but+does+not+receive https://www.google.com/search?q=KEM+P29923 ..