20 Most Recent Mad Catz PS3 Bluetooth® Headset Wireless Headset - Page 8 Questions & Answers

read instructions

Hi there. Usually for bluetooth headsets the passcode is "0000" or "1234". Try it, hope it helps.

i LOST INSTRUCTIONS AND DONT NO WHAT 2 DO

try this as follows:-- to get solid blue turn off ps3 from back than turn it on go to sting and blue tooth head set than on the head set hold button for 5 secs and there u got solid blue
click on this link directly http://www.madcatz.com/faq/default.asp?Action=Q&ID=146 in this link there is procedure to trouble shoot this problem of blinking blue light.
This will help. Thanks please keep updated.please do rate the solution positively .thank you for using fixya

The instructional booklet that came with your MadCatz item usually explains what you need to do. If it didn't come with a booklet, try charging it, then syncing it with your PS3 using the PS3's bluetooth sync capability.

Check to make sure that the bluetooth headset is compatible of connecting to the mobile device. If it is, then you will need to pair the devices using the Mobile Device. Make sure the Bluetooth Headset is switched on when the Mobile Device is trying to search for the Bluetooth Headset. It should work but if it doesn't, check the Manufacture's Website for any support.

The password for headsets is ususally 0000. If this fails, it might also be 1111 or 1234.

The passkey is "0000"

it is probably 0000

almost blue devices pass key set on 0000 but if you are anable to access with this code then reset your device and use this code.

http://www.blue-devices.com

my problem is the mic wont syncronize and wont respond to my voice and i cant hear other people through it .it still flashes blue and charges fine

0000

goto the companies website or goto downloads.com

Registering
1) Go to accessory settings
2) Click on Register blue-tooth device
3) Click on Headset
4) Scan, while holding down the main power button on the headset
5) Enter your 4-digit password. The default is normally 0000
6) Done

Using
1) Go to Audio Options (under accessories)
2) Click "Connect Blue-Tooth device"
3) Change everything from "Do Not Use" to your headset name
4) Done..

turn the volume up, DUH

0000

0000 is the passkey

Hi there...

It's probably not charged enough.
Make sure you plug in to your USB connector, and charge it before you try turning it on again.

Hope I helped!
Tom

like my headset was fully charged and i got grounded then it wouldnt work when i got my ps3 back if you have had the same problem shoot me a email at [email protected] if you have fixed it tell me out