Top 20 Yale Y150/40/130/1 Combination PadLock with - Page 2 Questions & Answers

If your Delsey combo lock won't lock, there are a few things you can try to troubleshoot the issue:

1. Check the battery: Make sure the battery in the lock is not dead. If the battery is low, replace it with a new one.
2. Check the lock's alignment: Make sure that the lock is properly aligned with the suitcase zipper. Sometimes the lock may be slightly off-center, which can prevent it from locking properly.
3. Check the lock's mechanism: Make sure that the lock's mechanism is not jammed or damaged. If it is, it may need to be repaired or replaced.
4. Check the lock's code: Make sure you have entered the correct code for the lock. If you have forgotten the code, you may need to reset the lock or contact the manufacturer for assistance.
5. Clean the lock: Sometimes dirt and debris can accumulate in the lock mechanism, preventing it from functioning properly. Clean the lock with a soft cloth and mild soap.
6. Check the suitcase: Make sure the suitcase is not damaged in any way that can prevent the lock from closing properly.

If none of these solutions work, it may be best to contact Delsey customer service for further assistance. They may be able to provide additional troubleshooting steps or may suggest to get the lock serviced.

Put gentle pressure on the catch and starting with the combination wheel that is furthest away, turn the dials until you feel it give a little, then move onto the next dial. The final dial will drop into place and open. There is also a 'shimming' technique, where you insert a thin feeler gauge leaf into the dials and feel for the flat spot. Then you turn all the dials together until the lock pops. Take a look at the videos from 'The Lock Picking Lawyer' https://www.youtube.com/@lockpickinglawyer

Apparently when you got the safe, you also got an emergency key for it as well, just in case you forgot the combination. The key also permits you to reprogram the safe. Where might the key be? --Perhaps with the documentation for the safe or a safety deposit box or gun maintenance materials. It is anybody's guess where you hid the key. You otherwise will have a difficult time opening the safe on your own. You may need a referral to a locksmith but here is the phone number to the technical services of Winchester Safes: Technical Service at 877-948-6723.

recheck batteries --go through owners manual troubleshooting for reset or notify manufacturer or a locksmith

1. Locate the reset button, which is usually a small button or lever located near the combination dials.
2. Press and hold the reset button while turning the dials to set your new combination. Make sure to remember this new combination!
3. Release the reset button and test the new combination to make sure it works.

Please note that the specific location and method for resetting the combination may vary depending on the specific model of REI Double Cable Lock you have.

Hi, double check that your door with the lock is closed properly. Pleas open control panel in order to check connections are set properly. If possible, change to new batteries. If all else fails, you might have to reprogram the lock. Thank you.

Troubleshooting help https://www.google.com/search?q=onity+lock+portable+programmer+not+connecting ..

Why don't you know the digital combination? You must be opening it every day if your medication is in there. Call a mobile locksmith. Tell them it is an electronic lock and ask if they have a rare earth puck magnet? They will use the magnet to draw back the electronic bolt.https://www.google.ca/search?q=open+safe+with+magnet..

Question edited for clarity. https://www.google.com/search?q=Carlton+3+digit+thumb+lockbox+reset ..

Question moved from Cars and Trucks to Electronic Locks. Yes you can if you have the System 6000. From the manual. https://www.dormakaba.com/resource/blob/1073080/98f7febd813735b4c42223cdfc771c76/system-6000-reference-manual-pdf-data.pdf Emergency Lock Power Supply (ELPS) The Emergency Lock. Power Supply is used to restore battery power to a lock that has insufficient internal battery power. When inserted into the lock, and inserting a cut valid keycard, a lock with a dead battery can be activated. This capability eliminates the need to forcibly remove a lock from a door because it has lost power. Once the door has been opened, the batteries can be replaced. Lock Programmer and Interrogator (LPI) Interface Probe / ELPS power override The Lock Programmer and Interrogator Interface Probe serves as an interface between the LPI Device and the lock. The probe can be used to program locks or to interrogate a lock when it is necessary to obtain a history of the keycards that were used to access the lock. The smartcard probe also allows an emergency override option when a dead battery condition occurs on a lock. Once the door has been opened, the batteries can be replaced. Video and further help https://www.google.com/search?q=Saflok+HH6%2C+door+with+dead+battery ..

Call a lock smith.

Not all the time but sometimes it is the result of trying to use the door handle too soon. Try a small pull and then a push. At other times, it is caused by gears wearing out from a handle being frequently pushed down. Try lifting the handle up. As I don't know the brand or model of the security lock, I'm hard pressed to offer a fix. Sounds like a mechanical issue rather than an electronic one. If so, disassembly is required. Why am I envisioning the door having to be taken off the hinges? Sadly, looks like a job for a locksmith.

Is there power on the display? Bad batteries, or incorrectly installed. Or you haven't set the new code which is erased when the batteries come out. Always do testing with the door open. 'make model (what it is)' in all questions please.

First, try pushing in on the door while trying to open. Tap/hit the area of lock to see if that helps. Call a locksmith if you do not want to damage anything. Drill the key cylinder. #1 and #4 best options

Some ideas here https://www.justanswer.com/electronics/bidgd-vingcard-2800-system-will-not-encode-key-tried.html https://www.google.com/search?q=vingcard+2800+card+reader+says+ioexception ..

Check out the videos. If it is locked, check out The Lock Picking Lawyer on YouTube. https://www.google.com/search?q=Brinks+5%2F8+vinyl+combo+bike+lock+reset ..

notify manufacturer or locksmith for assistance

find it in the attached vdo

Easy to open. https://www.google.com/search?q=Lost+the+code+for+my+brinks+four+digit+lock ..