20 Most Recent Jl Audio 10W6v2 Car Subwoofer - Page 2 Questions & Answers

Here's the Datasheet on the TDA7297 IC: http://pdf1.alldatasheet.com/datasheet-pdf/view/25110/STMICROELECTRONICS/TDA7297.html This should work for you. It also shows a recommended circuit for the part.

JL Audio JX1000, XD600/1, HD750/1 would all work nicely with those.

Contact JL Audio on their website, or use the dealer locator on their website to find your nearest JL audio dealer.

Make sure all your connections are tight , really tight . Check ground , make sure it's to clean shiney metal. Three subs are going to have a low ohm load if paralleled . These amps are not 1 ohm stable ,if below 1.5 ohm's you will have problems. They need to be series paralleled to raise the ohm load. These amps put out the same power from 4 to 1.5 ohms.

Parallel , all positives together , all negatives together . With 4 ,4ohm voice coils in parallel you get around 1 ohm .

Fried the outputs

they are most likely stretched out. try messing with the equalizer to make the sound more crisp.

Unlikely maybe going downhill with a good breeze.

Hi rodneybarton The problem of your unit may be its amplifier. You need to open the box and inside of it, there is a component that attached on the heatsink you need to replace that one. or better send your unit to qualified technician.