Dell PowerEdge 840 (becwmk1_2) Server - Page 3 - Answered Questions & Fixed issues
How do you connect 3 monitors on an Optiplex 7010,Dell 7010 has 2 DP ports built in and 1 Vga port
To connect three monitors to a Dell Optiplex 7010, you can use the built-in DisplayPort (DP) ports and the VGA port. Here's how you can set it up:
- Check the available video ports: As you mentioned, the Dell Optiplex 7010 has two DisplayPort (DP) ports and one VGA port. Make sure all three monitors support at least one of these connection types.
- Connect the first monitor: Use a DisplayPort cable to connect the first monitor to one of the DP ports on the Optiplex 7010. Ensure that both ends of the cable are securely plugged in.
- Connect the second monitor: Connect the second monitor to the other DisplayPort (DP) port on the Optiplex 7010, using another DisplayPort cable.
- Connect the third monitor: Since the Optiplex 7010 has only two DP ports, you'll need to use the VGA port for the third monitor. Connect the third monitor to the VGA port using a VGA cable.
- Configure display settings: Once all three monitors are connected, you'll need to configure the display settings to extend the desktop across all monitors. Right-click on the desktop and select "Display settings" (Windows) or "System Preferences" -> "Displays" (macOS). From there, you should be able to set the arrangement and orientation of the displays.
Note: When using multiple monitors, it's important to consider the graphics capabilities of your computer. The Optiplex 7010 might have limitations on the maximum resolution and refresh rate it can support across multiple displays. Check the specifications of your specific Optiplex 7010 model to ensure it can handle three monitors simultaneously.
If you encounter any issues or limitations, you may need to consider using additional hardware, such as a DisplayPort splitter or an external graphics card, to connect and support three monitors.
Why can't I get my Pyle HDMIUSB50 microphone to work with my Dell PC?
In the Settings app, click Privacy & Security (in Windows 11) or Privacy (in Windows 10). Under App Permissions, click Microphone, and make sure Microphone access is turned on. In Windows 10, select Change, and then turn on Allow apps to access your microphone. Choose which apps have access to the microphone
How do I reinstall Windows 8.1 back on my Dell with a USB and/or a SD memory card?
as win 8 is an operating system , the only way to uninstall it is to reformat the hard drive
If you have been spending time backing up files and folders that will not be a problem and you should go straight to win 10 from a usb stick
try control and delete to get the bios up and type in command c:\chkdsk and see if that runs
that is the inbuilt disc checker that rectifies all files and folder corruptions
otherwise take it to an IT specialist and see what can be done
Cant type in farm town chat
I don't have the answer, I wish I did as I'm missing my keyboard. The answer "just waiting a few days" is absolute hogwash! Mine hasn't come on ever at all and it's been days upon days. I've cleared my cache , updated my opera and google and google keyboard. Allowed the apps to access more I've tried going in through the fb app and online and different browsers and still notta. So then I wondered is it my keyboard on my tablet settings? But it works just fine everywhere else. I registered to the forum ad and never got my confirmation e mail when I go to search the forum for help the keyboard pulls up a half second and disappears immediately.. I've tried messaging support and heard nothing back and the email I used said it was undeliverable. I'm at a complete loss. Now I deleted the game and reinstalled and still nothing. I'm so confused and about to give up. And that's a bummer ! But waiting a few days has done nothing !
Green light comes on with CR3J1 beside it
The green light with "CR3J1" beside it on your Dell Dimension 4700 is most likely an indicator for the power supply. The "CR3J1" is a code for the power supply model number. The green light indicates that the power supply is functioning correctly and providing power to the system.
If you are experiencing any issues with your system, it is recommended to contact Dell Support for further assistance
Dell E210882 Motherboard. Does not start.
Question edited for clarity and add maker.
Question moved to Dell Desktop computer.
This only happens for a few reasons
Memory is the wrong type.
Memory added exceeds motherboard capacity (4GB)
Memory not seated correctly.
Memory faulty.
If the memory is not all the same size, sometimes they have to go in order, or in certain slots.
Memory
The Dell E210882 system board is compatible with
PC2-3200 (400 MHz) or PC2-4300 (533 MHz) DDR2 non-ECC and unbuffered SDRAM. The motherboard has four slots for memory. Compatible capacities include: 128MB, 256MB, 512MB or 1GB.
The maximum installable RAM is 4GB.
More here
https://www.google.com/search?q=E210882+Motherboard
How to bypass the power pack wattage error message on a Dell All-in-One
There are a few potential solutions to this issue:
- Check the power cord to ensure that it is securely connected to both the computer and the power adapter.
- Try unplugging the power cord from the computer, holding down the power button for 30 seconds, then plugging the cord back in and trying to boot again.
- Try using a different power adapter that meets the minimum wattage requirement of 65 watts.
- Entering the BIOS setup, check if there is an option to disable the power adapter wattage check and disable it.
- If none of the above steps work, contact Dell technical support for further assistance.
Please make sure you are using the power adapter which is certified by Dell and also make sure the adapter is not damaged.
I was updating my dell latitude E6400 bios software but light went off during the process of updating and it's keeps showing invalid configuration
If the power went off during the process of updating the BIOS on your Dell Latitude E6400, it can cause the system to become unstable and display an "invalid configuration" error. Here are a few steps you can try to resolve the issue:
- Try to boot the computer: Turn on the computer and try to boot into the operating system. If it doesn't boot, try to boot into the BIOS by pressing the F2 key repeatedly when the Dell logo appears on the screen.
- Check the battery: Make sure that the battery is properly connected and has a charge. If the battery is low, it may cause the system to shut off during the BIOS update.
- Run BIOS recovery: Dell has a BIOS recovery feature that can be used to recover the BIOS in case of corruption. To run the recovery, you will need to create a BIOS recovery USB drive and boot the computer from it. Follow the instructions on the Dell website to create the recovery drive and run the recovery process.
- Try a different power source: If you were using a battery during the update, try using the AC adapter instead. If you were using the AC adapter, try using a different one, or a different outlet to make sure that the power supply is stable.
- Take to a repair shop: If the above steps do not work, it may be best to take the computer to a repair shop for further diagnosis.
It's important to note that running a BIOS recovery may cause you to lose all data on your computer, please make sure to backup your data before proceeding.
Dell C1760NW colour laser printer operator panel fault
A Dell C1760NW color laser printer operator panel fault could be caused by several issues. Here are a few steps you can try to resolve the issue:
- Check the cables: Make sure that all the cables are securely connected to the printer and that there are no loose connections.
- Power cycle the printer: Turn off the printer and unplug it from the power source. Wait for a few minutes and then plug it back in and turn it on again.
- Check the settings: Make sure that the printer settings are configured correctly. Check the printer manual for instructions on how to adjust the settings.
- Update the firmware: Make sure that the printer firmware is up to date. Outdated firmware can cause issues with the operator panel. You can check for updates on the Dell support website or by using the Dell Printer Hub software.
- Check the operator panel cable: Check the operator panel cable, it could be loose or disconnected, make sure it's properly connected.
- Check the operator panel: If the operator panel is damaged, it will need to be replaced. Contact Dell support for assistance in obtaining a replacement operator panel.
- Contact Dell support: If none of the above steps work, contact Dell support for further assistance. They will be able to help you troubleshoot and diagnose the issue with your Dell C1760NW color laser printer operator panel.
Ik kan van mijn Dell optiflex 755 het front niet meer sluiten na open en.
- Controleer of er geen vreemde voorwerpen, zoals stof of papier, in de weg zitten waardoor de voorkant niet goed kan sluiten.
- Controleer of alle schroeven en bevestigingen goed zijn vastgedraaid en dat er geen onderdelen los zijn.
- Probeer de voorkant zachtjes te duwen of te trekken om te zien of dit helpt om deze te sluiten. Wees voorzichtig om geen teveel kracht te gebruiken om beschadiging te voorkomen.
- Als het probleem aanhoudt, is het mogelijk dat er een probleem is met de hardware van de computer. In dit geval raden we aan om contact op te nemen met Dell voor technische ondersteuning of om een professioneel reparatiebedrijf te raadplegen
Not finding what you are looking for?