PC came new with W10-64bit.you meant just exactly after the upgrade it failed.right, you meant the UPGRADE (from what?) failed hard.that error means the boot files are corrupted.easy if HDD bad. test it.is the HDD good? did you use secure boot or legacy boot to do that,?There are lots of possible cures. here.one is to ask dell for help on there forum.they can tell you how the original OS was set up.and they also have your drivers.no clues.
Hi, You
can download/ install Media Player Classic Download
the latest version of Media Player Classic (K-Lite Codec)
FOR FREE It
is a small but a very fine Media Player which also installs all the
required CODEC and you can play all audio - video files.
Hope it
helps! Good Luck! Thanks for using Fixya! CreativeTECH
no model stated, at all, must be old no? laptop from 2000 to now.
vast ,please tell what PC this is, REAL models matter.
https://en.wikipedia.org/wiki/Dell_Inspiron_laptops
AC power pack removed.
step 1, remove the old huge battery first and with AC pack back and connected , run the PC now.? on AC power only?
yes, good. battery is bad
if not the AC pack can be bad, a cheap fix that.
No cure,? the RTC coin cell battery deep inside is bad.
yes cured, great, no cure, then remove RAM sticks and reseat them.
cured now?
the beep means hard fault, there are up to 20 things inside that can fail.
the 20 steps are here.
https://www.pcdied.com/intel-magic/Powerbrain-LT/power-dead1.html#The_strip_down_test_is_next
Hello Bill.
12 year old PC laptop.
tell what is locked most PC have 2 to 7 or more locks, I can not see your screen to even begin to guess what you see.
it is an old laptop. tell how far you get turned on,?
what OS do you run,, windows? and is it w10?
it came with VISTA, so still old old VISTA.
you power it an and get Dell splash screen
then it stalls, or show asking for BIOS Admin Password.
or does not ask then goes to wndows login screee
where does the PC LOCK> I can not guess, screens. ok>?
Windows 10 right>? no OS told. but is windows sure.
\my guess is a dead DRIVE, if the drive does not PnP show up
that means A: it has no power, or B: the PnP chip inside is dead..
C : cables bad..
PnP means plug and play, and is a chip in all things that tell the PC WHO AM I, Identification even USB devices, same and all cards and RAM and yes HDD, and DVD drives
does the tray button work, eject? if not it has no power.(or is brain dead)
if you reverse the cables on the 2 drives, does the problem follow the
the DRIVE or cable ports.?
if follows the cables, . replace the cables, SATA..
the 3847 is only 6 years old , are any drives older?
that is it, besides testing any Drive on 2nd PC to gain proof, easy./
You can try GT Recovery for Windows!
GT Recovery for Windows is a professional data recovery for Android phone or tablet. It can restore deleted photos,videos,audios,documents from Android SD card and internalmemory. Whenever you lost important pictures or deleted photos by accident, you can use it to scan and recover the images on your Android devices.
Here are the steps to recover deleted data on Samsung Galaxy S4.
With this way you can recover deleted data on any brands of Android device such as Samsung, HTC, Huawei, Sony, Motorola, Lenovo, LG, Sharp, etc.
Download link:http://www.gtrecovery.net/
Dell laptops don’t come with a bios password by default. You or someone else who have used this laptop in the past, must’ve set that up. There is no factory default password.
Try this: Turn your computer on. As soon as you see the Dell logo appear on the screen, press and hold "CTRL" and "F11." This starts the Dell PC Restore by Symantec application.
McAfee strongly recommends its existing clients to register themselves on the official site before they purchase any subscription. Registration includes creating your profile with First Name, Last Name, email address and a strong password, al last. After you complete the registration successfully, you are good to go with the McAfee activate process that can activate the subscription of your McAfee product for your Dell PC. In case you face issues while activating the subscription, visit our blogs and know more about it.
well;, do go to dell.com, hint1, fixya is not DELL, ok?
and reload the printer software from scratch.
we all know windows forced updates can be bad
what I do use turn off driver updates.
ends the pain.
I have pro w10., and can delay many other updates for 3 month.
this is so I dont get 1/2 backed updates,
learn how to turn off driver updates.
Is my big hint.
ever like read the the first page
I guess this is your printer,l right.
http://www.dell.com/support/home/bg/en/bgbsdt1/product-support/product/dell-1133/research
it says clear as day "w10 not supported"
but then again I do not have your full service tag data facts
only the words 1133 to go on.
that can mean it works one day and the next
or not at all
or not for the next w10 update.
easy no?
if I found the wrong printer, then you go there and answer dells questions fully, and then land on exact facts exact models.
precision m90 LAPTOP PC. 14 years old came with XP.
the screen is dead , does the monitor work on other PC?
fans in PC spin , heard or seen.?
step on ALL LAPTOPS remove the now very very old big battery now and test the LAPTOP with only the AC power pack as power.
work now/ ? yes, then buy a new battery.
next is the RTC coin cell ,none last 14 years either .
Your S-Video connection is referring to a round plug for a TV input signal. Most computers will not have this connection unless you have a TV based video card. If your using a TV 'monitor' as your computer's video device, their will either be a button on the monitor or your remote to allow you to choose the input signal. If you are using a VGA or HDMI or DVI cable as the connector between the two devices, most likely, the light is referring to one of these, as its video source. You will need to match the cable & monitor source detected to get a usable picture output.
NO FAN stated, CPU,GPU,PSU,CASE. witch fan. desktop is is.on all PCs made, here is a real answer.open case,side,(read the free service manual at dell.find bad fan, unplug it and unscrew it .now screw in new fan and replug it.done. just 4 steps. easy no? if PSU fan that is next and not stated.the PSU totall replaced,, unless certified as tech to work high voltage, (I AM) and if you want to see it looks like see here.do not smash it flat like this, this is to demo only
2009 LCD monitor , 11 years old. and fails on all PCs I am sure.all have CCLF black lamps, 99% are dead, or dim or even yellow tinged.ok posted vast times this answer, if the OSD brightness setting fails then....the full story is here, 2010 is the first years of LED back lampsyou dont have those.the CCLF lamps are bad, you can replace them or buy never LED back lamped monitor, and frankly costs less.https://www.manualslib.com/manual/1015803/Dell-St2010.html#can I assume you turned on any monitorpushed the OSD menu button of front of iTthen navigated to the brightness OSD sectionand it's already fully high.,yes, then that monitor has bad CCFL backlamps.they run on 300vdc and the main board inside does that. the go dim, most of them are now, or dead.the have 20,000hr life span , very very short livedcompared to new LED monitors, very low life.
