20 Most Recent Jabra GN9330 Wireless Headset - Page 7 Questions & Answers

The battery has failed and unfortunately it cannot be replaced. You will need to replace the device. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/dave_fb2c45146b845cea

Nether me nor FIXYA has anything to do with your Jabra Oorder. Try to solve your problems with them. I don't undesrtand what you mean by listening music with an ear bug. Try to use some disinfectant to keep clean your ears of bugs.

delete it from your phone and then re search and pair

Try the powerboard, found it here on this site by searching the model. Be careful about removing the back cover after you unplug the tv and i would suggest using different cups to collect the different screws from each section. Take care when removing the cables and putting back the cables and you can take pictures before you remov anything to make sure things match up. Good luck!

Visit this page and follow the instrctions, If you need more help and you have TMP (insurance on your phone) Verizon Tech Coach does a great job at helping you out. (hint.I work there) 1-800-922-0204 or 1-877-894-4946.

Try this site: http://www.jabra.com/~/media/product%20documentation/jabra%20cruiser/quick-start%20guides/quick-start_guide_jabra_81-03031_revd_cruiser_na_lores.pdf

http://www.jabra.com/~/media/product%20documentation/jabra%20cruiser/quick-start%20guides/quick-start_guide_jabra_81-03031_revd_cruiser_na_lores.pdf

http://www.jabra.com/support/Jabra-BT2046_100-92046000-02#downloads Here is the link to the manual.

Noise canceling circuitry?

Not sure if you have provided the correct model. You need to pair the headset with the corresponding mobile phone and then accept the calls. Refer this table on the link and select the correct Jabra model and the mobile phone model and you will find the correct instructions. Bluetooth Pairing Guide

Hold the power button down until it either beeps or the indicator light stays lighted (this usually indicates pairing mode, might want to check manual to verify). Once headset is in pairing mode, go to phone's blue tooth settings and choose "pair" or "search for devices". This is pretty much the standard method for pairing devices using BT technology.