20 Most Recent Conair Professional Ceramic Hair Straightener - Black Questions & Answers

0helpful
5answers

My conair straightener won't heat up

i have the exact same problem !
7/27/2022 7:11:30 PM • Conair... • Answered on Jul 27, 2022
0helpful
1answer

Hi i have a babyliss

This type of home appliance is not repaired, so you will have to replace it.
6/29/2017 7:53:30 PM • Conair... • Answered on Jun 29, 2017
0helpful
2answers

My hair straighteners will not

see that happened to me u just have to thro it away and get a new one trust me it wont work again 3 of my family memeber r butician hair ppl or whatever salonist wehatevea u wanna call them so i get free straightener hair dryers and stuff so i dont have to worry :)
12/2/2016 6:39:14 AM • Conair... • Answered on Dec 02, 2016
0helpful
1answer

How can i fix the cord from my conair

Small Appliance Repair shop may be able to help, but probably best and more economical to just replace. If money is a factor to replace, check local thrift stores for a used one.
9/30/2013 8:36:16 AM • Conair... • Answered on Sep 30, 2013
0helpful
2answers

My conair straightener won't heat up

that same thing is happening to me! but iv had mine for almost 2 years...exact same hair straightener, its happening to many people! i dont know if this is the problem but alot of people wrap their cords around their straighteners (i did too) and it twists the cord that conects to the hair straightener and makes it loose. i still have not found a way to solve this problem.

i would just go out and buy a new one, and if your looking for good but inexpensive i suggest vidal sassoon. they get really hot and have many settings and many different types. mine has worked greats

just remember not to wrap the cord
7/19/2011 7:27:04 PM • Conair... • Answered on Jul 19, 2011
0helpful
1answer

When I plug it in

The heating element is broken. This is caused by dropping or banging the device.
6/17/2011 12:51:57 AM • Conair... • Answered on Jun 17, 2011
0helpful
1answer

My conair infinityhair straightener just

This is a job for one with a multimeter and soldering iron. Remove the temperature knob and the plate below that. It will expose the inside of the top half of the Straightener. You will see two set of red and black wires soldered to a green circuit board. See if the soldering are intact and no wire has come loose . Now unsolder the red wires ( please note which wire goes where ). With the multimeter in the Ohms range ( X100 ) touch the probes on the red and black wires each and check for continuity. The red and black wires are two ends of the ceramic heaters. If they have failed , replace .
3/7/2011 8:25:05 PM • Conair... • Answered on Mar 07, 2011
0helpful
1answer

My Conair Proshine Straightner won't

Most heated hair appliances are protected by a thermistor that will fail if overheated. These are small, about 1/2" long, cylindrical in shape with a pointy end and a wire coming from each end. When they go bad, they do not conduct electricity (zero ohms on a meter). There is a three digit number on the side that is the shutoff temperature. You can get these at Radio Shack.

Don't bypass this safety device.
1/7/2011 2:13:03 AM • Conair... • Answered on Jan 07, 2011
0answers
0helpful
1answer

Hi. my hair is plain n sleeky, but but still not

no,, no..no.. and a big no,, it realy wont do it any good at all,,,it will only harm it in the long term
and stop putting your self down,,,there are plenty of people in the world who will get a sick kind of kick out of doing this for you,,,and they do it for free,,,,
look,,,,you are looking at other people and trying to be more like they are,,,,wrong,,,wrong and wrong
you are what you are,,learn to like yourself,,
your as good or better then the person standing next to you,,and if people dont like your hair tell them not to look at it then, dont go spoiling it to please them after all you will have it for the rest of your life wont you??? not like mine?? its mostly all gone now!
now tell me life dont **** at times?
6/26/2010 1:49:44 PM • Conair... • Answered on Jun 26, 2010
0helpful
1answer

Helo,am kana..i want help on hair care..

just eat food with high zinc composition... and dont dry it in sun and wen fan is switched on then there will b split ends...... shampoo it thrice a week..... dont leave ur hair.....tie it always so that it grows faster....apply oil thrice a week alternatively........dont straighten ur hair......... when ever u have split ends just twist ur hair and cut the hair which has come out or burn it with a candle carefully...........thanking u sanjeev
3/30/2010 10:44:16 AM • Conair... • Answered on Mar 30, 2010
0helpful
2answers

MY STRAIGHTER LIGHTS UP BUT DOESN'T HEAT UP

just leave it on for like 20 mins and then it should start heating up.
12/30/2009 6:13:04 AM • Conair... • Answered on Dec 30, 2009
Not finding what you are looking for?
Conair Professional Ceramic Hair Straightener - Black Logo

38 questions posted

Ask a Question

Usually answered in minutes!

Top Conair Irons Experts

Sulejman Sulejmani
Sulejman Sulejmani

Level 2 Expert

138 Answers

Don A
Don A

Level 3 Expert

4499 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66967 Answers

Are you a Conair Iron Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Conair Irons

  • Conair Irons

Most Popular Question

conair straightener heat up

  • Irons
Loading...