20 Most Recent RCA 4-Device Universal Remote Questions & Answers

Did you check the manual? Did you contact the manufacturer of your universal remote for the code if they have it?

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" or "Magazine" view. It will make surf easier. http://electrohelponline.blogspot.com/

Check it with an other code for Sanyo.

Have a look at this site, should sort your problems:-http://www.thompsontv.com/rcarc.htmlLooks like the code you need is 002

Without having your remote's model number I cannot look up the code numbers. Please refer to the Universal Remote Control Code Finder http://www.p4c.philips.com/cgi-bin/dcbint/urccf.pl?slg=EN&scy=US

Hello
Codes to check with Emerson TV with RCA Universal remote control are:
11864, 10017, 10451, 10463, 10178, 10171, 11661, 11394, 11944, 11963

An RCA 4-device Universal Remote codes for an RCA tv/vcr combo are 1000, 1003, 1004, 1005, 1006, 1007, 1019, 1054, 1055, 1082, 1096, 1098, 1099, 1100, 1101, 1102, 1103, 1129, 1179, 1181, 1188, 1190, 1196, 1202, 1203, 1212, 1215, 1233, 1257, 1258, 1266, 1278, 1279, 1281, 1286, 1352 . These are the possible codes that RCA gives.

You can download a manual and codes list from
http://rcaaudiovideo.com/remotes/4-5-devices/?sku=RCR4258R
Let me know if you have any more questions. Please make sure to rate this solution. Thanks.

If you cannot locate the code for your device, try the code search method below:
Step 1: Turn on the device.
Step 2: Press the "CODE SEARCH" button until the indicator light illuminates, then release.
Step 3: Press and release the VCR, TV or Cable button. If programming for AUX, press and release AUX button first, then press the device type to be programmed.
Step 5: Press "ON/OFF" repeatedly until the device turns off. Note that because there are so many codes, you may have to press the "ON/OFF" button a few hundred times if your code is towards the end in the list.
Step 6: When your device shuts off, press and release the "ENTER" button.
Step 7: With your device on, press a frequently used button like "PROGRAM UP/DOWN" OR "VOLUM UP/DOWN" to test. If it does not function correctly, repeat steps 1 through 6.
Auto Code Search Step 1: Turn on the device you want the remote to operate.
Step 2: Press and hold the "CODE SEARCH" button until the indicator light illuminates, then release.
Step 3: Press and release the device key that corresponds to the equipment you want the remote to operate (TV, VCR/DVD or DBS/CABLE etc.). The indicator light blinks once and then remains lit.
Step 4: Aim the remote at the device and press the ON/OFF key once. The remote automatically sends every code for the specified component one at a time, with a a few seconds delay between each code. Keep the remote aimed at the component throughout the process.
Step 5: As soon as the component turns off, you must press the "ENTER" button immediately for the remote to store the correct code. If you don't press "ENTER" within a few seconds, the remote will send the next code in the list and you will have to start over from Step 2.
Step 6: Use Code Retrieval described below to identify the code for your device for future reference.
Code Retrieval If you used one of the "Code Search" methods to program your universal remote control, follow the steps below to find out which code is compatible with your device. Finding the actual code and writing it down will save you a lot of time if you ever need to program the remote again.
Step 1: Press and hold the "CODE SEARCH" button until the indicator light turns on, then release.
Step 2: Press and release the device key that matches the equipment's code you are retrieving (TV, VCR/DVD, DBS/CABLE, etc.). The indicator light will blink once then remains lit.
Step 3: Press and release the "CODE SEARCH" key. The indicator light will turn off.
Step 4: Starting with 0, press the number keys in order (0-9) until the indicator light blinks.
Step 5: The number that causes the indicator light to blink is the first digit of your code.
Step 6: Repeat Step 4 until you have retrieved all 3 numbers of your code.

The codes for Sylvania TVs for the RCR-4258N are
10030, 10054, 10096, 10171, 11271, 11314, 11394, 11864, 11963
Please rate this solution. Thanks

Here is a list of sites that have the rca universal remote codes and some do include 4 digits.

www.thompsontv.com/rcarc.html

www.remotecodelist.com/

www.universal-remote.net/rca.html

http://www.ehow.com/how_9191_program-rca-universal.html

I have a oneforall remote and it needs a four diget code and I have lost the book in my move.the RCA model F27440

my remote control is a urc 7740 and my tele is a sony how can i programe my remote to the tele?

Hello S Wakely,

Here are the Citizen codes for you

Citizen 011,027,033,064

hope this helps you out.

Cheers Little Dish Fitter