Top 20 Nintendo DS Lite Questions & Answers

Probably overheated and damaged the GPU.

It's just themed with Super Mario (coloured red with an 'M' logo) and includes a game. Specs wise, there is nothing different between the two.

When it says there is no card, the logic board can't read a card. So perhaps you used a defective card, or contacts are dirty or bent, or when it says so with more than one card, the device can have a defect, like a connection lost or as I said defective logic board.

Is the light blinking while you wiggle the plug? If so there are one of two problems one is that your cord is broke. Or two the jack on your DS is broken. Try replacing the cord first as it is cheaper.

If it is reading some card, but not others, the cards themselves may be damaged. It is also possible that the system is failing. You may want to consult with a local game shop and see what they have to say. It is hard to diagnose any system without looking at it. Good luck.

Get some isopropyl alcohol and with a cotton swab clean the gold fingers on the cartridge. As long as they fit in the slot this should solve your problem. Best of luck to you.

There is a possibility that your battery has developed a short circuit or is so bad that it pulls down the charge voltage on the charger. You are therefore left starved of a power and therefore no function. If possible, disconnect the battery and run the DS on the charger power alone. If the DS starts to work, I suggest replacing the battery.

Make sure the ribbon cables or the screens are plugged in. one for each screen and one for the touch screen (i think the touch screen is the one thats causing your problem) its small and comes out easily. please wright back if it works

Cheat mode :Pause the game, select the "Extras" option, and choose the "Enter Code" selection. Then, enter one of the following codes to activate the corresponding cheat function: Result Code Extras 2x Stud Multiplier UZFBG4 Minikit Detector 7VKCT2 Vehicles Avenging Cycle 5T3CQU Pumpkin Chopper 35E41W SHIELD Staff Car D5B7O3 Spider Bike SH9MZQ Characters Beetle Black Cat P9OWL0 Captain America (Classic) 7HWU4L Carnage AA0Z50 Howard The Duck J58RSS Hydra Soldier B7AA3K Iron Man (Mark 17 - "Heart Breaker") 2NGSRZ Iron Man (Mark 38 - "Hulkbuster") CK7SDS Iron Patriot MODOK SZ8Q06 Spider-Man (Future Foundation) WFOZXQ Thor (Classic) H8CSE6 War Machine TQ4C57 Wolverine (with hood "cowl") OAW2LB

I do not own the game, but looking it up results in the answer 'oxygen'. If that doesn't work, look through the game manual as it should be there.

This could be a few things. The easiest would be the battery. If the battery's connection points are dirty that may have something to do with your problem. It could also be the charger. Is it approved by Nintendo? Or it could be the charging port itself. If it's damaged internally or not situated right on the motherboard, then it may only be able to charge from certain angles.

no different software save your games on your pc get new card then transfer the games

The product manual refers to the pamphlet that you received with the game that lives in the left side of the DS game case.

Does it click when you press it or does it seem to be out of position? If so, that's an easy fit.To fix this you'd have to open up the DS and re position the button and the pin holding it in place. If not that, its probably got something to do with the trigger inside the DS. When you press the shoulder buttons, they push into a button just below them on the motherboard, which sends a message to the DS. If that has fallen off or started malfunctioning in any way, it could definitely be causing this. You'd have to order one online (link provided to an example) NINTENDO DS LITE BUTTON SWITCH REPAIR PARTS 4 NEW and then solder it in after desoldering the other one, if you know how to do that. If not, there are probably some repair guys with an ad on your local Craigslist who'd be happy to do it for you for a quick buck.

If the problem is internal (ie: the inside of the glass looks dirty) then you'll need to replace the screen. However, Nintendo has a guide on cleaning the outer screen.

Are you talking about the back cover or front cover? Either way, before starting you are going to need two things: A tri-wing screwdriver and a Philips screwdriver. To remove the BOTTOM COVER, you must take off the stickers covering the screws and remove the screws. Then, carefully pry the back off, revealing the motherboard inside. To remove the TOP COVER, you must take off the stickers covering the four screws in the corners of the INSIDE top screen. Unscrew them and gently push the inside top screen down until its about half a centimeter apart from it's backside. Then pull the backside off and you have it open. If you wanted to open the DS completely, like have it in half, you should first open the BOTTOM COVER and remove the motherboard after disconnecting it from everything attached to it. Then follow the steps given for removing the TOP COVER and slide the ribbon and cables sticking through from the TOP to the BOTTOM back to the TOP so that they are not sticking through and won't be damaged when you take the DS apart. Then unscrew the power light and voila! The DS should be separated.

You can save under the bed.

Your DS cartridge reader is faulty. Unless you know how to take the DS apart and replace the reader by soldering, you should just buy a new one.

Try to reset setting for 3ds, it mean you need to have default setting to avoid this error. If it still occurs then format all the data from 3ds.

If You are looking to send file from one console to another on DS Then Its Better To Send It through Your Pc as Nintendo DS is weak in wireless communication...