Top 20 AT&T Sony Ericsson W580i Cell Phone - White Questions & Answers

restart your phone and should be a menu that allow you to change to normal mode. Or put out your sim and open it with out sim close and do the same with the sim inside this time

Do you want the unlock(NCK code)?I suggest you can approach Simpleunlocking.com and specify the country,locked network,IMEI of Sony Ericsson W850i.You can get the unlock code along with free instructions.

Settings - GPRS WAP Sony Ericsson W580i GPRS WAP Pay & Go settingsPlease note all steps must be completed to ensure the settings are correctly configured. Please ensure that when entering 'O2' into the settings that the letter 'O' is selected not a zero. The W580i has a central navigation button (Navi key) and two soft keys slightly above this. 1. Press 'Menu' (right softkey).2. Highlight 'Settings' and press 'Select' (left softkey). 3. Scroll to the 'Connectivity' tab by pressing the Navi key to the right.4. Scroll to 'Data communication' and press 'Select' (left softkey). 5. Highlight 'Data accounts' and press 'Select' (left softkey).6. Highlight 'New account' and press 'Add' (left softkey). 7. On the 'Account type' screen, highlight 'PS data' and press 'Select' (left softkey). 8. On the 'Account Name' screen, enter 'O2 WAP GPRS', press 'Continue' (left softkey). 9. On the 'New PS data' screen, highlight 'APN' press 'Edit' (left softkey), enter 'payandgo.o2.co.uk' and press 'OK' (left softkey). 10. Highlight 'Username' press 'Edit' (left softkey), enter 'payandgo' and press 'OK' (left softkey). 11. Highlight 'Password' press 'Edit' (left softkey), enter 'password' and press 'OK' (left softkey). 12. Press 'Save' (right softkey). 13. Press the 'back' arrow key (key directly below left softkey) 2 times. Activate GPRS settings: 14. Highlight 'Internet settings' and press 'Select' (left softkey). 15. Highlight 'Internet profiles' and press 'Select' (left softkey). 16. Highlight 'New profile' and press 'Add' (left softkey).17. Highlight 'Name:' press 'Add' (left softkey), enter 'O2 WAP GPRS' and press 'OK' (left softkey). 18. Highlight 'Connect using' press 'Select' (left softkey), highlight 'O2 WAP GPRS' and press 'Select' (left softkey). 19. Press 'Save' (right softkey).Change GPRS settings: 20. Highlight 'O2 WAP GPRS' and press 'More' (right softkey).21. Highlight 'Settings' and press 'Select' (left softkey).22. Ignore 'Connect using'23. Highlight 'Use proxy:' press 'Select' (left softkey), highlight 'Yes' and 'Select' (left softkey). 24. Highlight 'Proxy address:' press 'Edit' (left softkey), enter '193.113.200.195' (to bring up the number press the number until it appears. Add the dots with the '1' key) and 'OK' (left softkey). 25. Highlight 'Port number:' press 'Edit' (left softkey), enter '8080' and press 'OK' (left softkey). 26. Highlight 'Username' press 'Edit' (left softkey), enter 'payandgo' and press OK (left softkey). 27. Highlight 'Password' press 'Edit' (left softkey), enter 'password' and press OK (left softkey). 28. Press 'Save' (right softkey).Change Homepage: 29. Highlight 'O2 WAP GPRS' and press 'More' (right softkey).30. Highlight 'Advanced' and press 'Select' (left softkey). 31. Highlight 'Change homepage' and press 'Select' (left softkey). 32. Highlight 'Name:' and press 'Edit' (left softkey). Hold the 'c' button (to the right of the Navikey) to clear any text in the field. Enter 'O2 ACTIVE' and press 'OK' (left softkey). 33. Highlight 'Address:' and press 'Edit' (left softkey). Hold the 'c' button (to the right of the Navikey) to clear any text in the field. Enter 'http://wap.o2.co.uk' and press 'OK' (left softkey). 34. Press 'Save' (right softkey).35. Press the backward arrow key (key directly below left hand soft key). 36. Highlight 'O2 WAP GPRS' and press 'Select' (left softkey). 37. Press the 'back' button (to left of Navi key) 3 times to return to the standby screen.

the pincode is on the simcard holder

That is a problem with your service.

You can contact your network provider for your Sony Ericsson W580i codes. Or get the codes online at WickedUnlock.com

sony erricson lock code is 0000 otherwise put new software into your phone.100% working guarantee.

Plugin your USB Cable and using the Sony Ericksson app on your computer, update your firmware. If you update your firmware and it STILL doesn't work, then i am afraid its the phone.

Your messages are saved in your phone memory & not on the memory card. You need to install PC suite now companion on your PC which is available on sony ericsson website & usb cable. Forget about the CD. The needed software are there on the website.

download an antivirus software in ur phone and scan ur phone

These are the troubleshooting and resolution steps for customers who see "Emergency Calls Only" or similar messages on their wireless phones. This message normally indicates that the customer lacks a wireless service provider/account or the device/SIM is not recognized.

1. Power-cycle the device.
   
   1. Power off the phone. While the SIM card is out of the device, clean the SIM card contacts by following these additional steps:
      1. Gently wipe the SIM with a soft cloth.
      2. Clean the gold contacts on the SIM card using a pencil eraser.
      3. Carefully remove all eraser residues from the SIM card.
      4. Carefully replace the SIM card back into its cavity.
      5. Check for Liquid damage; refer to Liquid Damage Indicator (LDI) Log.
      6. Once the SIM card is secure, replace the battery and back cover and power on the phone.
2. Place an outbound call.
3. If the test call is successful, end the call.
4. If the test call is not successful and it is possible, test the SIM card in another known working device.
   • To ensure accurate results, the test device must be the same technology as the device in question (UMTS, GSM, etc).
   • Ensure the test device is the same type of device (smartphone to smartphone, non-smartphone to non-smartphone).
5. If the test call is successful with the SIM in a different phone,
6. If the test call is not successful, the SIM needs to be replaced. Or you can call at&t so they can give you a free sim card. it depends on the situation.

( i hope i answer your question )


-----myrelle------

Hello thanks for using fixya
You can easily reset your Sony Ericsson W580i Cell

Put the memory card out(if it have), Now Go to Menu >> Settings > Reset > Reset All. If it ask the default code then it is 0000.
That will reset your phone to factory settings

I hope this solution will helpful for you
Please don't forget to click on Four thumbs which are given below & then write testimonial for my appreciation if it is helpful
THANKS & Keep Using fixya

It could be a sim problem or it could be a manufacturer problem or simply something in you message settings. I would take it to my service providers store because my daughter had a similar problem and the sim and the cell device completely fried and both were only about 2 hours old. I am really adamant about taking my cells to the service providers store when I have issues, mainly because replacement w/o warranty or extended warranty for a good phone is so expensive; therefore, I make use of all warranties while in effect. I hope my advice helps and thanks for the votes and rating of my solution.

Stormi

Hello and Welcome to FixYa!
Pictorial representation here Visual representation here
Concerned, Waqar.

sir try to speak from loud speaker of your phone if same problem arise then it means that there is some problem with microphone

type CBA -0002007

camera change and bonzerflex change

Hi,

If you need the PUK ( Personal Unblocking Key ) for your phone, you will have to contact your mobile
phone service provider.

PUK code is related to the SIM card you are using and not the phone. So, kindly call the Customer
support of your mobile service provider and they will provide you with the PUK code fre of charge.

Also, entering a wrong PUK code ten times in a row disables the SIM card permanently. So, please be
careful while entering the PUK code.

Hope this solves your problem. Thanks for using FixYa.

A request for a PUK code ("Personal Unlocking Key") will appear on your phone if your SIM card PIN code is entered 3 consecutive times incorrectly.

Your SIM card will then become "PUKed" or Blocked. This is a security measure to protect your service.

You need to call the Customer Service department of your cell phone provider and they will give you the PUK code which will unblock your SIM card.

Please check whether any other camera related application is running in the background. For that, do 'long-press' of menu button. Then exit that application then try relaunching the normal camera.
If it's not the matter, your firmware might have been corrupted. Try re-installing it, either using SonyEricsson PC suite or at an authorised service center.

Regards
Vineeth K.