Top 20
Kodak ESP 3 Multifunction Printer/ Copier/ Scanner Questions & Answers
My Kodak ESP3 acts like it runs out of ink...faded
There are many situations by witch a printer can act that way. Remove all cartridges after turning off the printer or unplugging it. On each cartridge are metal pins or contacts, usually gold colored. Take a Qtip saturated slightly with rubbing alcohol and rub (clean) off any residue, pat dry and let air dry. Do not touch with you fingers as it leaves film on the contacts. Reach inside the cartridge well and you will see corresponding contacts. Do the same as you did with the cartridges. Visually look at the contacts to see if any old ink may still be present. If so, clean again. Now you have a good connection between the cartridge and the printers contacts. Replace and see if that corrects the problem. Generally, it is a good idea to use brand new carts, but if the previous carts are full, use them anyway. When you turn the printer on, go through the head cleaning and alignment procedure first before you try and print a page. See if this fixes the problem.
I have a brand new kodak esp 3200 all in one
Brand new ? take it back to the store ? ask for a replacement but pick a different brand ,maybe a small $ adjustment might be necessary depending if you pick a more or less expensive brand .
I have a Kodak ESP 3 printer which, if interrupted
Could be that your unit is running pretty much at max memory and the slightest thing or interruption will stop it dead in its tracks...Try adding another memory strip or a larger one to see if that has any effect. Or maybe your OS is unstable and the slightest thing causes a malfunction.
How can I share Kodak i2400 on Lan?
It is not possible, unfortunately. I would love to read this article you referenced. There are many services, resources, and registry issues that come into play. As an alternative, Kodak produced the Scan Station 500/700 for this very reason. Cheers!
Why does machine say paperjam but there is no paper in machine?
It may be a small piece of paper, be sure to check ALL the paper travel inside the printer. If there's absolutely no paper, maybe one or more of the detectors is bad...
Also, check that ALL the covers are properly closed and the toner/cartridges are properly seated, it may not clear the jam error until everything is in place again.
Print not clear on black print with colour breaking through across paper
your ink cartridges are clogged or empty. Sometimes they get reset even though they are nearly out. remove them carefully clean all of the gold part with a clean soft cloth. Re insert and try to print a test page. If unsuccessful purchase new cartridges.OEM for a good quality refill from a known company is best.
Paperjam siplay no paper in the back
hi open your printer so that you can see the wheels that feed the paper into the printer and check that no paper is stuck in the meconisom is this is soum times wey it says paperjam
With new ink we cannot print or scan
By 'scan', I assume you mean that the printer will not make copies of things you put on the scanner, i.e. photocopy mode.
I'm not sure how long your printer has been without ink. If it is just recent then try the following.
Check that you have installed the cartridges correctly. Make sure that any tapes are removed from the cartridges - this will allow air to pass through the cartridges and release the ink.
Using your user guide or handbook, find out how to prime the cartridges. It will be under the printer maintenance section.
You may also need to run the head cleaning utility to unblock the print heads.
If the printer still does not respond then you may need to consider having a repair shop look at it.
There may also be a series of videos on YouTube that can help you with your printer or a user forum that can help such as fixmyprinter.com
Printer
Have you tired going to Kodak website and downloading the free printer software?
Not finding what you are looking for?
