20 Most Recent Kodak ESP 3 Multifunction Printer/ Copier/ Scanner - Page 5 Questions & Answers

you may try to clean the printhead and recalibrate the printer. if this will not correct the problem, you need to replace the printhead. I suggest contacting Kodak technical support to have a replacement printhead.

Try to change the ink cartridges first.

reload the wireless including key code

Check the complete paper path very carefully, it only takes a small fragment of paper stuck somewhere to signal a paper jam. Also check that the paper sensors have returned to their normal positions. See that the printer has not picked up a second sheet of paper and this is somewhere in the path.

In removing the jam you have pulled aswitch in side loose . Usually a plastic black switch that will trigger this . It is inside and will need to be reset inplace.

Try unpluging your printer for a few minutes, turning it back on and printing a test page. This worked for me.

Look around the main menu for something that might cause this. Such as a power saving option.

You may download drivers and software from here.

Go to www.kodak.com/go/itg and select all in one printers and then paper jam as your problem. they will give you step by step instructions to resolve the issue. if this does not solve the issue, call kodak @ 1800 421 6699 and they will replace the printer for you free of cost as all the esp-3 printers are in warranty as of now.

You may view/download the user guide here.

I have the same problem on my printer, the same as yours, and have not come across a solution yet. Please e mail me at [email protected] with the solution if you have come across one. Many thanks