20 Most Recent
Kodak ESP 3 Multifunction Printer/ Copier/ Scanner - Page 3 Questions & Answers
How can i install my
Update your kodak esp3200 driver by using this tool
driverupdate us. It is easy to use, and will update every needed driver on your PC/laptop/mac. best of luck
My Kodak esp 3200 won't print labels on Avery
I am having the same problem except you didn't address the problem. It's not that the printer prints badly, jams or crashes. The printer literally passes the label paper through the printer and then prints on the next piece of copy paper. I reset my printer not to print the last page first and it still did it. Then I put the label paper second in the feeder. It passed through the first piece of copy paper and the
labels and printed on the third. It's like the printer senses the thicker paper and skips it. My printer is a Kodak ESP C315 and I have no setting for thick paper only plain and photopapers.
Why does machine say paperjam but there is no paper in machine?
It may be a small piece of paper, be sure to check ALL the paper travel inside the printer. If there's absolutely no paper, maybe one or more of the detectors is bad...
Also, check that ALL the covers are properly closed and the toner/cartridges are properly seated, it may not clear the jam error until everything is in place again.
Print not clear on black print with colour breaking through across paper
your ink cartridges are clogged or empty. Sometimes they get reset even though they are nearly out. remove them carefully clean all of the gold part with a clean soft cloth. Re insert and try to print a test page. If unsuccessful purchase new cartridges.OEM for a good quality refill from a known company is best.
Kodak 3.2 ESP has an error clear all paper code 3528 but there is nothing there
Turn off the printer and unplug it. Open the top access panel. Inside on the left you will see three round, white gears. Rotate the gear closest to the front back and forth with your finger. If any scraps of paper appear near the rollers, remove them. Close the top access panel. Plug in and start the printer. This worked for a Kodak ESP 3.2.
Not finding what you are looking for?