La Crosse Projection Alarm Clock with Temperature and Humidity Display - Answered Questions & Fixed issues
Projection display blinking
YES! I also have the same issue - I ASSUMED that it was the RED LASER BLINKING behind the PROJECTED time (on the wall/ceiling), but a different brand with a similar problem was described as actually a PROJECTED RED LED, NOT A LASER. In either case, still not sure what the problem is. ;(
To RESTATE the ISSUE for NEW READERS: These digital alarm clocks (with AutoSet through radio signals) project the time in red color on the wall or ceiling. HOWEVER, after some time, the PROJECTED RED TIME begins to flash or blink INTERMITTENTLY - this is NOT a setting issue. The flashing/blinking projection is totally intermittent, occurring every 0.5 to 6 seconds, randomly, leading me to believe it COULD be broken/cracked soldering contact points (which presumably could be fixed by resoldering those contact points on the circuit board), OR perhaps some issue with the internal chip (which would NOT be fixable by a DIYer, I would assume). ANY THOUGHTS?? Thanks!
5/20/2022 3:29:02 AM •
La Crosse...
•
Answered
on May 20, 2022
•
180 views
Remote signal not received by Shift 3 projection alarm clock
1) Does the remote have batteries? See other posts that describe how to do this (4 screws in back need to be removed). Temperature should be displayed in small window of the sending unit if it's working.
2) Hold Channel button for 3 seconds until it beeps - the unit then searches for a signal.
12/16/2018 12:04:35 PM •
La Crosse...
•
Answered
on Dec 16, 2018
•
526 views
Shift 3 Projection Alarm clock remote cannot open
Once the batteries are installed in the remote the temp will appear in the LED screen. Now you are ready to link signals between the main unit and the remote. Simply remove one of the two triple A batteries from the main unit and then replace. You should then see what appears to be a flashing object shaped like a kite with a tail while the two units link up. Then you should see the temp reading at the remote appear in the LED readout at the main unit. By the way there is also a very small reset at the top of the switches on the back of the main unit that can be depressed with a SMALL pointed object like a scissor point or safety pin point.
4/18/2011 6:04:22 PM •
La Crosse...
•
Answered
on Apr 18, 2011
•
4,285 views
Where to put outside remote
If you have storm windows, put it between the window and the storm window.
Or try just below the overhang of your house.
2/25/2019 2:54:18 AM •
La Crosse...
•
Answered
on Feb 25, 2019
•
247 views
Openfit Shokz battery replacement?
Question edited for clarity, typo and CAPS.
Question moved from Cars and Trucks category.
Claim on the warranty irrespective of how long you have had them. They charge $180 but they cost them $20 to buy from China. Package them up and send them tracked and ask them to replace the batteries.
How long is the warranty on AfterShokz?
While we hope you never need it, all new Shokz purchased from authorized retailers come with a two-year warranty that begins on your date of purchase.
Jan 11, 2019
https://www.google.com/search?q=Openfit+Shokz+battery+replacement
..
My roadking rk4000 wont charge. I turn it off to charge it but there is no indicator light at all, any suggestions?
Are you using the charging cables that came with it? That is a type C. Are you securely attaching the charging cable? A loose connection would keep the battery from charging. If you had a low battery, you would see a red light. That you have no light at all suggests there is no charge left in the battery. I'm not sure the reset will work with no charge which is why you ought to check the cables first.
But turn it off and then hold down the Multifunction button for 10 seconds to reset it. Then turn it back on and see what happens. If you can, test the charging cable on aother device. If you have another type C charging cable, try it, just to eliminate a bad cable. If these suggestions don't work, you may try the manufacturer's customer support.
Can f2100 remote work on my dishtv box?
The F2100 remote is not explicitly listed as compatible with the AerialBox T2100, I recommend using the remote that came with your AerialBox T2100 for optimal functionality. If you have any specific compatibility concerns, I suggest reaching out to Dish TV customer support for further assistance.
Audiosonic CR-06PL not changing time when following manual instructions.
Set Time Hours and Minutes: Press Time/12/24 and Alarm1/ON/OFF buttons at the same time for two seconds and it will start to blink the hour.
Press and hold the button for a fast setting or tap it briefly to increase the setting by one hour. Now set the minutes with time (press and hold) and min.
How do I set the Audiosonic clock? Set current time Press and hold the time button and simultaneously press the hour to set the hours in 24-hour mode .
Not finding what you are looking for?