Top 20
LG Over-the-Range Microwave Questions & Answers
Replace thermal fuse for LG microwave LMV1813ST
If too much current passes through the microwave circuitry, the line fuse will blow. If the line fuse blows, the microwave won't start. To determine if the line fuse is at fault, use a multimeter to test it for continuity. If the fuse does not have continuity, replace it. In addition, you should investigate and resolve the problem that caused the fuse to blow. If you don't resolve the underlying issue, the new fuse will blow too. (Caution: The microwave oven can store thousands of volts of electricity in its high voltage capacitor, even after the microwave oven has been unplugged. Due to the potential for electric shock, it is extremely dangerous to replace the electronic components in a microwave. Only a licensed technician should replace the line fuse.)
9/28/2015 8:04:41 PM •
LG...
•
1,123 views • 1 helpful votes
Everything works but the microwave does not heat up at all
You are looking either a High Voltage Transformer or a Magnetron. These are only sold directly to authorized service technicians as the voltage that runs through them is extremely dangerous to work with.
I would find a local repair shop in your area that works on Microwaves and take it to them.
4/27/2015 5:10:49 PM •
LG...
•
208 views • 0 helpful votes
Instructions on how to remove the cover from a wall mount LG LMV2073 mic oven?
On my GE, if you open the door, there are screws to remove that will allow the cover to be removed. When it quit working, I had to show the guy how to remove it. He thought he had to take it all the way down. Turned out to be the fuse (which I could not see when I had it opened) so he charged me half the cost to come out because I had to show him how to open it
10/30/2014 5:46:29 PM •
LG...
•
706 views • 0 helpful votes
How to know when a fuse is burned in my lg microwave?
By looking at it, if the metal strip is melted/broken the fuse is bad. Using a VOM to test it. Remove one side of the fuse from the holder, put one lead on each side of fuse. meter indicates 0.00 fuse is good, meter reading does not change fuse is bad. Electonis fuses can only be checke with a meter not visualy.
8/11/2014 7:15:28 PM •
LG...
•
369 views • 0 helpful votes
Not finding what you are looking for?