20 Most Recent LG Over-the-Range Microwave - Page 5 Questions & Answers

You can download LG UK manuals here.

Yours shows up in the search.

You'll need to download the free Djvu Viewer to view or print it.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Hi eb6181,

If it's within warranty, I'd exercise that and get it fixed.

Usually, if it appears to run, but isn't heating, the magnetron has gone bad. It's not a cheap part, and not really a DIY (do-it-yourself) operation. If your warranty covers the part, that will help a lot.

Even if not within warranty, I'd have an authorized service center do the job. They should have a list of authorized outlets with your manual and other literature. They can also give you a quote as to how much it will cost - - only you can make that call.

I had a magnetron replaced once, it was spendy, but ~20 years ago, microwaves were a lot more expensive than they are now.

If I can be of further assistance, let me know. If this helps or solves the issue, please rate it accordingly.

Thanks in-advance for using Fixya.com,

Jon

get it servie center

this is a safty feature I think your fuse needs replaced Cheap to fix!

It is located on the top of the chassis under the outer cover.

You will need to remove the oven from the wall and remove the outer cover to get to it.

Having the installation instructions really helps in this case, but if for some reason you don't have yours, L.G. / Goldstar manuals can be downloaded here.

If yours' is not available there, call 1-800-243-0000 (M-F, 7am-8pm CT, Sat 8-5 CT) and choose the appropriate prompt from the menu or visit here.

We have the service manual and parts manual for this model and have uploaded them to our site here and here to help you.

You will need the free Acrobat Reader to view or print it in case you don't have it

The oven cavity thermostat is part # 6930W1A003D and it can be ordered at the Sears parts site.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

We have the installation manual, which includes the installation instructions.

If you would like, I can either e-mail it to you or upload it to our Web site at no charge.

Please feel free to contact me directly.

We're happy to help and we appreciate your thoughtful rating of our answer.

William E. Miller, AS-EET
[email protected]
http://www.microwavedisplay.com

If your LG Solardome microwave oven is overheating a melamine plate within 30 seconds, there could be a few potential issues at play:

1. Power Settings: Check to see if the power settings on your microwave are too high. If it's set to a high power level, it can cause certain materials, like melamine, to overheat quickly. Try reducing the power level and see if that helps.
2. Plate Material: Melamine plates are not suitable for use in microwave ovens as they can overheat and potentially release harmful chemicals into your food. It's recommended to use microwave-safe dishes made of glass, ceramic, or microwave-safe plastic.
3. Microwave Performance: If the microwave is consistently overheating items within such a short time frame, it might indicate a malfunction. In this case, it's best to contact LG customer support or a certified technician to inspect and repair the microwave.
4. Placement and Usage: Ensure that the plate is placed centrally on the turntable and not touching the sides of the microwave. Also, avoid using the microwave for extended periods without interruption, as this can cause overheating.
5. Testing with Different Materials: Try using a microwave-safe ceramic or glass plate to see if the issue persists. If other materials heat up quickly as well, it could indicate a problem with the microwave itself.

I have a new Kitchen Aid Convection Microwave with air fryer. I've not yet used the air fryer, but today I put a pan with a roast and set to convection roast and turned it on. I put the aluminum foil over the top of the pan and it sparked. I don't know why this happened. I'd sure like someone to let me know.

Push clock button and press the Up/down buttons to change time to pm.

Remove the contaminated and fit a new Waveguide cover.

Here are the steps to remove the door cover from the door of your LG Microwave model LMHM2017ST:

1. Unplug the microwave from the power source.
2. Open the microwave door and locate the four screws on the inner edge of the door.
3. Use a Phillips screwdriver to remove the four screws.
4. Carefully separate the outer door panel from the inner door panel.
5. You will now see the door cover attached to the outer door panel.
6. Use a flathead screwdriver or plastic pry tool to gently pry the door cover off of the outer door panel. Start at one corner and work your way around the edge.
7. Once the door cover is removed, you can replace it with the brushed silver cover from the new door.
8. To reassemble the door, simply snap the new cover onto the outer door panel and then reattach the outer door panel to the inner door panel using the four screws you removed earlier.

Make sure to be careful when removing the door cover, as it can be fragile and may break if handled roughly.

This is Microwave Oven! https://www.fixya.com/support/r29874712-repairing_microwave_ovens ..

Question edited for clarity. It depends where you live? In the UK, the fuse is in the wall plug. In the US and other countries it _may_ be at the rear where the mains lead goes in. Sometimes they pull out, sometimes there is a small screw cap. If you are thinking of getting inside it, this Tip I wrote applies. https://www.fixya.com/support/r29874712-repairing_microwave_ovens ..

Question edited for clarity. Question moved from Building Materials to LG Microwave. Take into an LG Service centre for repair. They are sealed by security screws and are dangerous inside. You won't be able to get parts.. If it is a counter top microwave and cost $60, just buy a new one as they are a disposable item.

if smells like something then something is burning stop using answer about can it be fixed is unknown till diagnosed

latch/catch failure

THE HIGH VOLTAGE FUSE IS IN A PLASTIC EXTRUSION NEXT TO THE CAPACITOR AND DIODE. YOU CAN USE 3 OR 4 STRANDS OF THIN WIRE FROM MULTI STRAND 15A MAINS CABLE. SOLDER IT OVER THE BLOWN FUSE. I HAVE DONE THIS 100'S OF TIMES.

Possible fuse for the magnetron power, capacitors or magnetron or all.

Go for a warranty repair anyway. It may be the magnetron, and the clicking is the big condenser discharging. https://www.lg.com/ca_en/support/warranty Microwave Ovens (Over-the-Range):

• 1 year parts & labour
• 5 years on the magnetron (part only)

Microwave Ovens (countertop):

• 1 year replacement warranty
• 5 years on the magnetron (part only)