20 Most Recent Lexar Professional High-Speed 1GB Secure Digital Memory Card - Page 8 Questions & Answers

It should have a small 120V to DC wall adapter charger with a DC wire / connector jack that plugs into the back of the power pack. Plug the wall adapter into 120V outlet and plug the DC connector jack into the back of the Power Pack. Leave on charge until the unit indicates it is charged fully (several Hours if it was fully discharged).

E6 showing

These are all messages that follow overheating. E.nOH indicates that the heat sink has returned to the normal temperature range and the unit can be reset. E. OH indicates that the power module is over-temperature. This could be caused by insufficient air flow at the heat sink. That is caused by dust/dirt. The ventilator could be clogged or the ambient temperature is too high. E. OH2 indicates that the motor protection relay was tripped. Check for dust/dirt and clean any filters. Make sure that nothing is blocking the air flow around the unit. KEB uses these error mesages on the CombiVert F6, https://www.keb.de/fileadmin/media/Manuals/f5/control/f5m/00f5mebk320.pdf . I hope this helps. Cindy Wells

defective charger

Hello Shakeel, the PG156R diode, you can replace it with any fast diode of 1000 Volts, 3 Amper I send you a link for you to unload the PG156R datasheet and another about the replacement I hope you can solve the problem Greetings Franco Dosil Hola Shakeel, el diodo PG156R, lo puedes reemplazar por cualquier diodo rapido de 1000 Volts, 3 Amper te envio un link para que descargues el datasheet de PG156R y otro sobre el reemplazo Espero puedas solucionar el problema Saludos Franco Dosil https://pdf1.alldatasheet.com/datasheet-pdf/view/406020/PANJIT/PG156R.html https://www.yoreparo.com/tv/televisores/tubo/preguntas/1412382/puedo-reemplazar-diodo-pg156r-por-un-rg10 https://www.yoreparo.com/tv/televisores/tubo/preguntas/1284512/reemplazo-de-diodo-uf156 PG156R NTE Equivalent NTE571 1000V 3A soft recover

the inverter has tripped or fuse blown...

alternating current 3 phase....

Buy the best quality one you can afford. Be aware that the rated max use is not the continuous use level. Add up the total watts you want to use and buy a converter 30-50% more so there are no overload issues. Make sure the inverter is operating in an area of free flowing air for cooling purposes.

Hi, guessing you are from the UK? Different countries operate different regions for dvd's for instance the UK dvd players are set up to play region 2 discs, and US dvd players are set up to play region 1 discs.
This is because dvd release dates are different around the world and this stops people buying a dvd in the US and bringing it back to the UK and selling it before its official UK release date for example.
Your choices are either to play the dvds on a PC where often the dvd software will allow you to change region a number of times (be careful though as some players will let you change region say 5 times and then be locked to that region)
Or to get hold of or buy a multi region dvd player which plkays dvd'd regardless of their original region
Hope that makes sense, good luck

Same thing happens to me .My 8gb silicon usb flash drive got the same error, please insert a disk into drive, the name of my drive weas changed into Removable Disk instead of the name(Sanctuary which is what i used) It said ni media ,and it was registered as XXXXXXXX U167CONTROL USB DEVICE can anyone help me with this.

What make and model is the inverter?

I have a Blu Dash X and have 2 sim cards plus a micro SD. If you can get the back off (a fingernail in the little crack on one of the corners) you can open it up and slide the card into the slot that is marked for it. The contacts go toward the front of the phone.

The more things u put on your phone the slower it gets probably u got a auto delete function on it but need more info to diagnose

There should be a default password. Try that.

Put in Google charging cord for and then your model

How to safely open Micro MC_90 cassette

On what???

Sorry, but that's not very specific. Most USB memory sticks (aka thumbdrives) are "plug-and-play." Meaning you stick them in a USB host socket on a PC (MAC or Windows or Linux, for example) and they automatically get configured and are available for use - just as you would use a computer hard drive. If that is not happening, then there is a good possibility that the stick is not properly formatted. If it is recognized, but you cannot access the data, then you may need to run the FORMAT utility on your computer. Be aware that this will erase any data currently on the stick. If you KNOW that you have data on the stick, and it is important to you, then there are data recovery companies that will do their best to access the data (for a fee).

That watch is referred to as Casio Module 2705 (AW-E10) and the manual for it lists the battery as an SR920W, which has several crosses including to AG6. This doesn't seem to be a very common battery, certainly most or all of my other watches don't use that particular battery.