If your GE stove is beeping and displaying the message "bad line," it typically indicates an issue with the electrical power supply. Here are a few troubleshooting steps you can try to resolve the problem:
Check the Power Supply: Ensure that the stove is properly plugged into a functioning power outlet. Verify that there is no issue with the circuit breaker or fuse that supplies power to the stove. You may need to reset the circuit breaker or replace a blown fuse if necessary.
Inspect the Power Cord: Examine the power cord for any signs of damage, such as cuts, fraying, or exposed wires. If you notice any issues, it's advisable to replace the power cord with a new one to ensure safe and reliable operation.
Test the Outlet: If possible, try plugging the stove into a different power outlet to see if the "bad line" message persists. This step helps determine if the issue lies with the stove or the electrical supply in your home.
Contact a Professional: If the problem persists or if you are unsure about performing further troubleshooting steps, it's recommended to contact a qualified appliance repair technician. They can diagnose the specific issue with your GE stove and provide the necessary repairs or replacements.
This issue could be caused by the oven regulator valve not being set correctly for the altitude and fuel source. I'd suggest double-checking that the regulator is properly adjusted to the altitude and fuel source. Additionally, you may want to check the oven igniter and burner for proper operation and make sure the correct model and size of burner is installed. If you have any further questions or need help, please feel free to reach out.
It might be from the burners being dirty or from the electrode not being properly sealed.Or the burner head and the caps are not correctly have been matched up.
Based on the serial number you provided, VH267627Q, it appears that your GE Profile Range Model JB968SOK1 was manufactured in 2006. The first letter of the serial number represents the year of manufacture, with "V" indicating the year 2006. The second and third digits represent the week of the year it was manufactured, with "H2" indicating the 26th week (or late June) of that year.
This sounds like a blown thermal fuse. You can point to point wire in place of the fuse for checking. I have personally fixed many of these and its is nine out of ten times the thermal fuse.
Replace the board located in your panel. It sounds as though the button port is worn out. You might try removing board and cleaning with a Q-tip and rubbing alcohol. Here are also some other things worth trying.
Sounds like your thermal fuse has blown. I have included a video. This part is either ceramic or round metal. This is not an uncommon problem to have. Especially after running broiler or self clean mode. All main power is cut off by a blown thermal fuse. In some cases, on ovens that have door lock. The door will remain locked. Normally the Thermal Fuse is located under stove top. All gas and electric ovens and dryers are equipped a thermal fuse for safety reasons.
The spark module on a GE Profile C2S985SET7SS front panel dual fuel stove is typically located behind the control panel or near the burner controls. It may be accessible by removing the control panel or by accessing a service panel on the back of the stove. For specific instructions on accessing the spark module, it is recommended to consult the owner's manual for your stove or contact a professional repair service.
Tis most likely a stuck relay on the oven temperature control circuit board. GEEEEER!
Repairclinic.com
or
Appliancepartspros.com
Their coustomer srevice people can help you by phone.
Best to you
It sounds like you are having a problem with the ignition system on your GE XL44 range. The ignition system is responsible for lighting the gas burners on your range, and if it is not functioning properly, the burners will not ignite.
There are a few things you can try to fix this problem:
Make sure that the burners and the ignition system are clean. If the burners or ignition system are clogged with debris, it can prevent the burners from lighting.
Check the ignition system for any visible damage or debris. If the ignition system is damaged or clogged, it may not be functioning properly.
Check the electrical connections on the ignition system to make sure they are secure.
If the problem persists after trying these steps, it may be necessary to have the ignition system inspected by a technician to determine the cause of the issue.
It is also possible that there is a problem with the gas supply to the burners or some other issue, so it may be worth having a technician inspect the range to diagnose the problem.
To properly install your GE Model number 326B1036P001 slide-in range, you must determine the type of electrical connection you will be using and follow the instructions provided for it. Generally, a 40A circuit is acceptable. However, if you add or need to use a 50 amp circuit, you must ensure that the wiring and breaker size is sufficient with no breaker issues. To determine if the thermal fuse has blown, you can use a multimeter to test it.
