Lexar FireFly 2GB USB 2.0 JumpDrive - Page 2 - Answered Questions & Fixed issues

Some flash drives have a case that is too fat to be fully inserted in usb connector of some PCs, I have has the same problem, try a short usb extension cable, worked for me.

This may be due to several reasons, some solutions are:
1.Changing the drive letter of the USB drive in Disk Manager

2.Navigate START / PROGRAMS / ACCESORIES / SYSTEM TOOLS / SYSTEM INFORMATION
Check system manufacturer = motherboard manufaturer and system model is the model of your motherboard. If not correct
go to the manufaturers website to look for a bios update.

3.Clean the jumper of the USB power in the motherboard. Release it and reconnect it.


Try with these solutions, i am not sure the result of these solutions.

how many drive letter you have on your system?
make sure your drive is inside the usb port. I assume you are running windows system. Right click on my computer, click manage, then click disk management. Can you see your flash drive there, right click over it and assign a drive letter and thats it, you should see it.
Or
disconnect any f drives which you have by simply right clicking and disconnect, your flash drive should show you right away.
Or
Install any drivers which came with the drive and you should see it.

Hope that helped!

You may need Administrator privileges on your computer. Plug in flash-drive. Allow time for Windows Explorer to read it. Run AV scan if suspect. To get a list of attributes: Launch Start > Run > CMD. From the command console enter attrib F: (or whatever the drive letter is for your flash). to redirect output to a text file enter (example) attrib f:>%homepath%\flashatb.txt From the list you should see [H]idden, [S]ystem or [R]ead only attributes for write-protected files. You can also do it via Win Explorer by right-clicking the drive icon. Remove all above attributes. As a last resort, you can full-format the entire flash via explorer. Which should wipe all files / folders on the drive.

does the card contain important data? if not would formating it help? have you a computer you could plug the sd card into and see what windows makes of it? http://en-americas-support.nintendo.com/app/answers/detail/a_id/452/~/general-sd-card-and-microsd-card-troubleshooting check nintendo site and see if that helps.

There is a little tab on that unit that slides back and forth. If the tab is missing, you need to use a piece of scotch tape to simulate the tab.

plug the flash drive into a usb port it will register on the desktop and will be recognized in the computer and given a designation--- example:- drive h--- select what you want and save as --in h or copy /paste to h or if you have 2 screens click and drag to h in the computer section of the second screen

Please check this link. How to Use an SD Memory Card

http://www.lexar.com/support/product-support

Either there's a little switch on the side, or the card has failed.

SD cards have a slide switch along one edge. The position farthest from the metal contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card.

Once the device is recognized by your computer, locate the icon for the drive and select it, right click and scroll down to the format option on the context menu. Be sure you don't format over a drive that has necessary files as formatting will erase all files on the drive. Choose the appropriate format for the system it will be used on.....Windows, Linux, Apple etc.... Often you will have other options, such as Quick Format (most appropriate) or Complete and Utterly Long Format (which - as you might infer - takes for freakin' ever!)

If using Windows system on a computer: Click start, then Computer then find the USB thumb drive you want to format, right click on the drive and then click on "Format" on the dialog box that appears.

Just plug it in and it should be recognized by Windows and assigned a drive letter.

Try this: Go to Start, right click on My Computer, select manage. In the left pane click device manager, scroll to Universal Serial Bus Controllers. Delete all of them. System may not allow some to delete, thats fine just delete all that it will allow. Then leave your usb connected to the PC and reboot. OS will reinstall all usb drivers on its own, and it may then see your stick.

You can try using a file recovery software like Bad Copy Pro 4.10.125. It works well for me.

Try http://www.apple.com/macbook-pro/ You most likely will need a different card to be compatible with your MacBook pro. Apple website should be helpful.

you just try to add files more than 142 mb if it goes smoothly then add files up to 4 gb and then again format it in other device

What happens when you try?

USB can be recognized by your computer? Try 4Card Recoovery. How to Recover Photos Videos off SD Card after Formatting Unformat SD...