20 Most Recent
Saeco Odea Giro Espresso Maker - Black/Silver - Page 5 Questions & Answers
My Saeco Xsmall stops before brewing the coffee
1- The grind fineness setting is too fine. Pump is not able to pump through the compacted coffee grounds.
2- The machine is not descaled. The Calcium deposits in the hydraulic system have reduced the pump pressure. The partially clogged water passages can generate a back pressure to reduce pumping pressure. Was the machine descaled in the past two or three moths? If yes, what was the descaling product used?
3- The pump may be air locked and not able to pump water.
4- Oily beans may have been used. Oily beans are poison for the all fully automatic espresso machines. This clogs the grinding chamber or the grinder outlet. This model is made in Romania made in 2006 or after. This machine has a Ceramic Burr grinder 2006 which is a huge problem to clean adjust beans quantity per shot of espresso etc. etc. Occasionally it will dump dry coffee grounds when the quantity of beans powder is insufficient.
Based on the above details, you can figure out what is wrong and fix it. See the exploded parts diagram included, for help.
Services Unlimited Inc Parts Guru Since 1988 Btw, I’m available to help over the phone in case u need at
https://www.6ya.com/expert/edward_bbd2c7ff4ee1828a
Is there a way to factory reset my Saeco Xsmall settings?
Restart instructions descaling procedure - Step 18-25
1) Empty the large container and the drip tray and place them back
2) Rinse the water tank and fill it up to the MAX level with fresh water. Put it back in the machine
3) When the green 2 CUPS light turns on, turn the control dial to the HOT WATER position
4) The machine dispenses through the hot water/ steam wand until the water tank is empty
5) After this, the machine turns off. The red EXCLAMTION light switches off. Turn the control dial to the BEAN position
6) Rinse the drip tray and put it back. Reinstall the pannarello/ cappuccinatore and INTENZA+ water filter (if applicable)
7) Rinse the water tank and fill it up to the MAX level with fresh water. Put it back in the machine
8) To make coffee, turn on the machine
Not finding what you are looking for?