Belkin Wireless-G Plus MIMO Router with USB Adapter and Geek Squad Installation - Answered Questions & Fixed issues
Hi. I have a Belkin
Check for the wireless encryption settings associated with this. If you're trying to join a network with "Open" settings to a encrypted network it won't work very well.
11/17/2017 9:25:29 PM •
Belkin...
•
Answered
on Nov 17, 2017
•
101 views
Wireless printer
Call the tech people at the router company they will walk you through getting it set up properly. If it worked before the change over, then part of their job is making sure you are set up again with the new system.
10/3/2017 3:09:45 PM •
Belkin...
•
Answered
on Oct 03, 2017
•
83 views
Got my password
Connect a LAN cable from Belkin to your laptop/computer's LAN port, open a browser on your laptop/computer and enter the Belkin's configuration URL. http://192.168.2.1 The default PW = blank (just press Enter) You can now change the default admin password. You can now configure the wireless settings. Now configure the wireless card in your computer/laptop with the router's wireless settings. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security
11/20/2012 2:08:22 PM •
Belkin...
•
Answered
on Nov 20, 2012
•
94 views
Hotmail.com
Try plugging your computer directly into your connection (not using the wireless router) If you can access your hotmail then, it is a router problem and you need the geeks to come back.
9/9/2012 5:56:37 PM •
Belkin...
•
Answered
on Sep 09, 2012
•
220 views
I have a beklin G router.
Step 1: Connect your computer - Router ( Wired)
Step 2:Make sure that the wireless is disconnected in the laptop
Step 3:Open Router setup by typing http://192.168.2.1 on the address bar of internet explorer
Step 4:On the left under wireless click Wi- fi protected setup
Step 5:Leave the Password blank and click submit
Step 6:Disable it and click apply changes
Step 7:On the left under wireless click security
Step 8:Selected the security mode as WPA / WPA2
Step 9:Type a password in the blank field ( Pre Shared key or PSK )Make sure that the password is a minimum of 8 characters
Step 10:On the left under wireless click channel and SSiD
Step 11:Change the Wireless Channel to 6
Step 12:Change the SSiD to a different name
Step 13: Click Apply Changes
Step 14:Unplug the power cord from the router
Step 15:Plug it back After 15 seconds
Step 16:Now try to connect to the new network
- Tom Riddle
Goto belkinrouters.blogspot.com for more
8/14/2010 4:45:37 PM •
Belkin...
•
Answered
on Aug 14, 2010
•
82 views
I have a Belkins G wireless router and I have 4
- If you are loosing the signal when it is freezing it may be the auto channel setting on you router. it is looking for a better signal, you may need to change it from auto configure to a static channel (Choose a channel)
- You may need to update your firmware. You can do that at this link Firmware link just select you version (on the bottom of the router) and download the newest version.
- Call 18002belkin and its open 24 7 and ask them for the beta firmware for you router. This has been the fix for you problem. but you have to call to get it. It is not on the firmware site yet.
I hope this helps.
5/30/2010 6:13:58 PM •
Belkin...
•
Answered
on May 30, 2010
•
100 views
Setting up security for the wireless netword
All of the settings and information will be available on the manual, which can also be found here:
http://cache-www.belkin.com/support/dl/p74880-d_f5d9230-4_manual.pdf
You can login to the router by going to the address: http://192.168.2.1
If you are going to be using wireless connections, you should try enabling WPA. Or if you are not going to be using wireless connections, it's best to lock the network itself. Once again, you can find much more valuable information in the manual.
3/8/2010 11:39:45 PM •
Belkin...
•
Answered
on Mar 08, 2010
•
172 views
My beklin wireless g+mimo router will not work
The printer is usually discovered by the computer, not the other way round.
Use Windows explorer, networks to discover it.
1. Make sure file and printer sharing for networks is enabled on networking part of the control panel for Windows.
2. Make sure the appropriate protocol has been set up ie TCIP and that the printer has an IP address in the range recognised by the router.
3. Make sure the printer is in the same workgroup under windows.
3/7/2010 5:49:13 PM •
Belkin...
•
Answered
on Mar 07, 2010
•
151 views
The wireless network is being picked up by the
if you connect the computer directly to the modem, does it work?
If your computer is able to go online through the modem, that means the modem is working fine.
You will need to connect the computer to the router and the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.
Click Here for more information about the routers and network
3/6/2010 7:17:40 PM •
Belkin...
•
Answered
on Mar 06, 2010
•
155 views
We have a Belkin G+ router and receive a pretty
I'm afraid you can't boost the sgnal from the router without buying a repeater/booster box.
You will get the best wireless performance from your router if it is in the highest position possible in the house - of course it may be impractical to move it but, if you can, then do so.
The only other option is to purchase a booster. I don't know what country you are living in, so I can't give definitive advice. You should try a search on google or ebay for "wireless router booster"
Everything is possible!
If you want more advice please reply here with a comment and I will try to provide further assistance.
3/5/2010 8:38:16 PM •
Belkin...
•
Answered
on Mar 05, 2010
•
116 views
The Belkin wireless router I am trying to set up
You need to provide a model number for the router.
Here is a link to Belkin where you can select your model number and get more help:
http://en-uk-support.belkin.com/app/product/list/q/routers/session/L3NpZC81QURmM0JUag%3D%3D
2/3/2010 4:59:21 AM •
Belkin...
•
Answered
on Feb 03, 2010
•
178 views
I have just bought the belkin wireless g+ mimo and
the printer and Wii may not recognise WPA security type. change the security type to 64bit WEP. in ur router u'll have WPS(wi fi protected set up) , u need to disable it. this will make ur printer and Wii work.
1/10/2010 10:37:54 PM •
Belkin...
•
Answered
on Jan 10, 2010
•
116 views
My G Mimo Plus adapter won't pull and IP address.
Is there a RESET button on the back of the router, if so power it up and press the RESET button until all the LEDs flash and reconfigure the router.
Try a different LAN cable, the other could be faulty
Install the latest LAN and wireless card drivers (this problem sometimes occurs when you install a new router).
Check the LAN and wireless cards are functioning correctly in Device Manager.
Open the DOS cmd window.
Test the NIC - loopback test address - ping 192.0.0.1
Ping the router's IP configuration address
Type ipconfig to see what IP address you get (if any)
Type inconfig /renew all - this will (should) get a new IP address from the router's DHCP
Let me know how things work out.
12/24/2009 6:36:13 AM •
Belkin...
•
Answered
on Dec 24, 2009
•
205 views
Not finding what you are looking for?