Top 20 Belkin Wireless-G Plus MIMO Router with USB Adapter and Geek Squad Installation Questions & Answers

Check for the wireless encryption settings associated with this. If you're trying to join a network with "Open" settings to a encrypted network it won't work very well.

Call the tech people at the router company they will walk you through getting it set up properly. If it worked before the change over, then part of their job is making sure you are set up again with the new system.

How to Connect to the Internet Wii and Wii mini Nintendo Support

Connect a LAN cable from Belkin to your laptop/computer's LAN port, open a browser on your laptop/computer and enter the Belkin's configuration URL. http://192.168.2.1 The default PW = blank (just press Enter) You can now change the default admin password. You can now configure the wireless settings. Now configure the wireless card in your computer/laptop with the router's wireless settings. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Try plugging your computer directly into your connection (not using the wireless router) If you can access your hotmail then, it is a router problem and you need the geeks to come back.

Click the "Can't access your account?" link on the Hotmail sign-in page.

It seems your computer is infected with trojan/viruses.Please scan your computer using some free software like malwarebytes and install antivirus on the computer.www.malwarebytes.orghttp://free.avg.com/gb-en/free-antivirus-download

Here is a great tutorial to Connect and troubleshhot your Xbox to a wireless network.
If you need more help post back! Thumbs and testimonial are welcome!

click here to find how to reset the password... or to change the password.... or better to find your old password....

Step 1: Connect your computer - Router ( Wired)

Step 2:Make sure that the wireless is disconnected in the laptop

Step 3:Open Router setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 4:On the left under wireless click Wi- fi protected setup

Step 5:Leave the Password blank and click submit

Step 6:Disable it and click apply changes

Step 7:On the left under wireless click security

Step 8:Selected the security mode as WPA / WPA2

Step 9:Type a password in the blank field ( Pre Shared key or PSK )Make sure that the password is a minimum of 8 characters

Step 10:On the left under wireless click channel and SSiD

Step 11:Change the Wireless Channel to 6

Step 12:Change the SSiD to a different name

Step 13: Click Apply Changes

Step 14:Unplug the power cord from the router

Step 15:Plug it back After 15 seconds

Step 16:Now try to connect to the new network
- Tom Riddle

Goto belkinrouters.blogspot.com for more

• If you are loosing the signal when it is freezing it may be the auto channel setting on you router. it is looking for a better signal, you may need to change it from auto configure to a static channel (Choose a channel)
• You may need to update your firmware. You can do that at this link Firmware link just select you version (on the bottom of the router) and download the newest version.
• Call 18002belkin and its open 24 7 and ask them for the beta firmware for you router. This has been the fix for you problem. but you have to call to get it. It is not on the firmware site yet.

I hope this helps.

http://www.belkin.com/support/product/?lid=en&pid=F5D9230-4&scid=221
All at above website.

All of the settings and information will be available on the manual, which can also be found here:
http://cache-www.belkin.com/support/dl/p74880-d_f5d9230-4_manual.pdf

You can login to the router by going to the address: http://192.168.2.1

If you are going to be using wireless connections, you should try enabling WPA. Or if you are not going to be using wireless connections, it's best to lock the network itself. Once again, you can find much more valuable information in the manual.

The printer is usually discovered by the computer, not the other way round.
Use Windows explorer, networks to discover it.
1. Make sure file and printer sharing for networks is enabled on networking part of the control panel for Windows.
2. Make sure the appropriate protocol has been set up ie TCIP and that the printer has an IP address in the range recognised by the router.
3. Make sure the printer is in the same workgroup under windows.

if you connect the computer directly to the modem, does it work?
If your computer is able to go online through the modem, that means the modem is working fine.
You will need to connect the computer to the router and the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.

Click Here for more information about the routers and network

I'm afraid you can't boost the sgnal from the router without buying a repeater/booster box.

You will get the best wireless performance from your router if it is in the highest position possible in the house - of course it may be impractical to move it but, if you can, then do so.

The only other option is to purchase a booster. I don't know what country you are living in, so I can't give definitive advice. You should try a search on google or ebay for "wireless router booster"

Everything is possible!

If you want more advice please reply here with a comment and I will try to provide further assistance.

You need to provide a model number for the router.

Here is a link to Belkin where you can select your model number and get more help:

http://en-uk-support.belkin.com/app/product/list/q/routers/session/L3NpZC81QURmM0JUag%3D%3D

Is there a RESET button on the back of the router, if so power it up and press the RESET button until all the LEDs flash and reconfigure the router.
Try a different LAN cable, the other could be faulty
Install the latest LAN and wireless card drivers (this problem sometimes occurs when you install a new router).
Check the LAN and wireless cards are functioning correctly in Device Manager.

Open the DOS cmd window.
Test the NIC - loopback test address - ping 192.0.0.1
Ping the router's IP configuration address
Type ipconfig to see what IP address you get (if any)
Type inconfig /renew all - this will (should) get a new IP address from the router's DHCP

Let me know how things work out.

the printer and Wii may not recognise WPA security type. change the security type to 64bit WEP. in ur router u'll have WPS(wi fi protected set up) , u need to disable it. this will make ur printer and Wii work.

From Belkin's Support web site: Windows 7 Product Support Information Windows 7 users:
If you are using an older Belkin Networking product, you may not have support for Windows 7 with your current software. Please visit your product specific support site to check for updated Windows 7-compatible software for your product.
Software updates will be posted as they become available. Please check back if your product is not currently supported.
Some updates may still be in the process of going through Microsoft’s official certification program. Although they have been thoroughly tested, they may present a warning message when the driver is being installed. These drivers will install on 32 bit operating systems but not on 64 bit systems, which is the normal and expected behavior.

http://en-us-support.belkin.com/app/answers/detail/a_id/2742/q/network-adapters

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309