20 Most Recent Compaq Mouse M-s34,spares P/n: 141189-401, Fcc Id:dzl211029 - Page 11 Questions & Answers

HP compaq old what makes you think, this laptop sports WIFI direct connect? wow! what are you doing name reason, a job a task.? here ask at HP , HP owns COMPAQ, COMPAQ is DEAD now. but does have very limited support , like here. why in the world use XP the VIRUS MAGNET. ? https://h30434.www3.hp.com/

ooh FLOPPY the only person on earth using one. only 1% of users in USA still use XP, (and less every day) why:? omg , oh my gosh XP, why use XP the VIRUS magnet. see UK hospitals go dead from XP cyber-attack last month.?? I can see you type on an ASR33 teletype writer, plugged in to XP cool... how cool is that, I love it. love legacy stuff. we had those in Vietnam too, and later on very crude micros in the 70s , CAPS ONLY, ) The old PC with XP can not run right without HP install disks the CDs install there are no Driver to load, nor F6 needed so let me guess, you have Microsoft CDs not HP CDS so sure Microsoft fails, as they all did then. and now. F6 is FLOPPY ONLY . why not at least go to VISTA, (supported end 2 months ago) but VISTA dont need no stinking FLoppies. bty HP sold a HP USB floppy box, but the installer may not work with XP setup.exe. (< this is the big pain this) that driver is at Intel.com The trick is to put that file where, setup.exe can find it. no easy task with USB ports dead in XP. no usb memory sticks work at install time. zero XP is so old I an not go back in my mind to 2001. 17 long years ago, and what i tired then, (i can tell you I tried all possible waYs) (we had 50 techs then, vast knowledge base) one trick is 2nd CD drive with the file there, from HP. the super good trick was slipstreaming my own custom XP install CD-r (but the CD must read CD-r, oops) but i did that then, put the intel driver there. why not just end the horrors of XP, now. be like the last person to upgrade XP. its dead put a sword through its bad heart.... if XP is a LOVE thing, why? then here it is https://restore.solutions/en/hpcompaqpresariocq40144tu/ or>? http://www.computersurgeons.com/m-34-compaq-presario-notebook-pc.aspx OR? https://www.restoredisks.com/search/?q=CQ40+ learn that real HP disks are preload with the correct drivers. and NO F6 is needed,

hey Windows 7 stated, first time here in days, nobody ever tells OS. you are a winner for savvy award 1000 old relic COMPAQ LT. your LT now has 2 mice, and if you run 2 mice what happens they try to get in a fight. we must shut off the mouse pad first. I guess this mouse is a MS mouse, no mouse name stated. I shut off the mouse pad in device manager. look for the USB mouse not, is this unstated mouse wireless, if yes a new battery is now needed. and matching usb dongle. now plug in the mouse. PC goes DING donng., and it loads a driver be in the internet to W7 can find the driver. if still dead, go to device manager, see that mouse there under. mice and other pointing devices mine shows, HID mouse here. if missing , plug the mouse into all USB ports 1 by one and listen for the DINGDONGg (means new USB device discovered) if still fails buy a new mouse, gee barrow one for a day. if that mouse works , trash the dead one. you can not have 2 mice at same time or you get into trouble. the old mouse pad , we had to use disable in device manager to kill it. on the new HP we have newer driver and it has this. " tab, automatically disable pad mouse with usb mouse active" but old ones dont have this I too hate pads. when the thumb hits the pad, I want to kill that pad fast. one ebay a 5 pack of mice is $14 a 5 year supply, all mine fail in 1year, the wires snap near mouse inside, easy;

no pc stated, maker or model #,, sounds kinda DESKTOP>????? no oS stated step one is test the MV4 on a known working pc,!!! why wait, this so basic.... are you using VGA to VGA or DVI to DVI connections?????? the DESKTOP, no sound means the fans are dead and PSU dead. The PSU will run for 1 second and fans run now. if not PSU is dead. if fans do run and stop that means PSU dead or mobo shorts or bad reg on MOBO. or bad ram. strip it down to test that. ok fan runs that means 12vdc good. if stay running, and if PSU stays up, then NEXT TEST IS Screen is it 100 % dead, or do you get text or logos." 100% dead means to me bad VGA card(or chip GPU) if the Hot key for BIOS fails, that means bad POWER/ or bad VIDEO card. the fans run but are silent, I envy you.. sell me your fans.... im 1/2 deaf from Vietnam and can still hear all my fans. my DT has 4 fans min. (it's Alien-ware box++++) CPU, GPU and PSU, and 1 case fan,all must work. do yours? when you power on a PSU, the fans run and stay running if that takes sides off so be it, ever clean the 5lbs of lent seen inside from 5 years, collected? If you dont service any pc, this packs up and the CPU overheats and shuts its self down by DESIGN. why no do that service first. see that CPU, see those fins, see that pack up there. blow it out, outdoors, using CAN-0-AIR mine over heats my GPU fast with lent, my Graphics car runs super hot and fast and lent is NOT ALLOWED here. ever.. old pcs with slow cpu ,, tend to packup slower, well lets say they can run longer with huge lent here. its just slug processor so... that is what it does. recap.

1. fans all run.
2. BIOS dead?
3. screen dead. no words no text at all.
4. MV4 tested on other PC works. proves PC bad.
5. LENT PACK job. as all do every year here, all.
6. Bad VGA caRD. or using wrong port if PC has 2 VGA jacks. !

Scream all you want - no one is going to hear you. You need to install a wireless adapter inside your PC and also set up a wireless network.

I can Fix this issue by taking remote access of your computer...one time charge $ 30 only call at 1-800-339-9634. Harry

decide what is faulty and replace it otherwise a new mother board and cooling fan new chip/ new power supply if less than 500 watts new sshd ( sata ) better faster performance with no moving parts to fail graphic board to suit your requirements operational cd unit if you can find a good computer repair shop and follow advice you will get a new pc unit that is better than any off the shelf unit for around 1/2 the price with a 12 month warranty on all new units installed all you need is a good idea of what you want to use the computer for and get the units best suited for the job

You may have a bad backlight screen power supply board and that is usually mounted in the bottom part of the screen right behind the front bezel. This supply's high voltage to the backlight tube that lights the screen. This is kind of like a small florescent tube that uses high voltage to fire the backlight and is a common failure point in laptop screens. Easy to fix, just pop the front bezel off and the module will be in the center bottom section of the screen. Do a YouTube search on how to disassemble your model's screen and the parts can be found on Ebay. Good luck.

It's not recognizing the TV as a monitor. Find out what resolution the TV runs, then set the PC to those using the other monitor.

You can reset the router and configure from beginning.

you will need the missing drivers for that link supplied Compaq WF1907 19 inch Diagonal LCD Monitor Software and Drivers

Open the Windows Command Prompt. a. ... The MAC Address for each network card in the computer will display in the Command Prompt window. The PhysicalAddress: This is a 12-digit number also known as the MAC Address of your Network Adapter. The Transport Name: This is the location of the Network Adapter cmd prompt: ipconfig (simple write that in command screen and it wil show you both IPv4, also will show the IPv6 , but v4 is what you need for the MacAddress.

if sounds as if you may have drivers missing, what model number is your compaq laptop and what operating system is installed?

download a new copy, link provided which should download, burn it to disk then reboot your Hp Windows XP SP3 ISO Full Version Free Download Original Softlay

A crude manual/guide is available here http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c00496280 There are two power supply connectors labeled AT12V small square 4 pin upper left corner and 24 pin rectangular and ATXPWRR1 upper right between memory slots and floppy drive connector

Use a partition eraser on the drive. Note that unless you use a disk like Hirens boot cd and make it an iso and put it on a bootable drive as an image, you are going to have issues with having to remove the drive and connect it to another computer to remove the partition.

The "no signal" message is not coming from your computer, it is your monitor complaining that it is not getting a signal from your computer. 1st thing is to check that the cable from the computer to the monitor is connected, there are screws but sometimes people don't tighten them. Is the computer actually turning on? Do you hear fans, see lights? If you are sure the computer is actually booting, it probably means the onboard video is gone. You can replace it with a cheap PCI video card. I suggest cheap because the system is 6 years old. ATI PCI 1GB Memory Computer Graphics Cards eBay Here is how you install it. How to Install PCI Express Video Card

I don't know which operational system your computer installed with. For different Windows OS, there are suitable ways to unlock the computer. Or what preparation you make for before your computer locked.For example, you can access Windows XP in safe mode. Unlock computer in safe mode is effective way. If you have a password reset disk, reset windows 7 with boot disk is another choice.So how to unlock computer or laptop based on the Windows operational system and what you have. More details, you can refer to: http://www.isunshare.com/windows-password/unlock-laptop-when-forgot-password.html

No they are erased.