20 Most Recent
Brother CS6000i Computerized Sewing Machine - Page 5 Questions & Answers
Zigzag stitch not catching
try these suggestions and see if they helpSkipped stitches
1. The needle is not inserted correctly
Remove needle & reinsert needle( flat side towards the back of machine)
2. The needle is damaged
replace with new needle
3. The wrong size needle is being used
Choose a needle to suit the thread & fabric
4. The foot not attached correctly
Check & attach correctly
New machine, foot peddle has part of spring
1 - Unplug the power from the wall.
You can remove the top of the foot control by CAREFULLY prying the top and bottom apart with a flat screw driver at the pivot point where they hinge. Once you have it open you can put the spring back where it goes and snap the top back on. Make sure you have first put the top and bottom together at the end opposite the hinge/pin end.
Not finding what you are looking for?