20 Most Recent Brother CS6000i Computerized Sewing Machine - Page 2 Questions & Answers

Where can I find my Brother machine's serial number? Where can find my Brother machine serial number Brother

Your machine is computerized and, as such, are closed systems (difficult-impossible to take the covers off per manufacturer's design). May be worthwhile to take it for service.

try changing the needlecheck the top thread tension to make sure it's not to looserethread the machine top & bobbin, make sure the bobbin is woundcorrectly & inserted correctly into the machinemake sure the thread has not come off the thread take up lever

hi http://www.brother-usa.com/ModelDocuments/Consumer/Users%20Manual/UM_CS_6000_ES_2000_EN_185.PDF see page 62. Regards Rob www.electronicrepairs.co

I don't use mine, it seems to flimsy and makes me nervous! I have several machines and some are singer that can run off that same power cord, don't get caught up on a specific model as they will really get you for the price. Check ebay or your local junk stores sometimes have these newer ones. https://www.facebook.com/groups/cs6000i/

I usually have left the presser foot up when it does that to me HOWEVER, I have never opened my machine!! If you found out what happened we would love to know. https://www.facebook.com/groups/cs6000i/

Hi! Guy at http://www.sewingmachineparts.net/ always seems to have what I need. Here are a few other sites:
http://jhittlesewing.com/sewing/catalog.php
http://www.mastersewusa.com/accessories.html
http://sewingpartsonline.com/

And finally, Brother's website: http://www.brother-usa.com/homesewing/

Good luck and let me know if this works.

Robbie

Page 62 of the manual, manual is here under file: https://www.facebook.com/groups/cs6000i/

https://www.facebook.com/groups/cs6000i/ all that and more! Page 62 of the manual, manual is on here too under file.

https://www.facebook.com/groups/cs6000i/

https://www.facebook.com/groups/cs6000i/ Join us ans see if someone knows this answer, there are some very knowledgeable folks.

Joint us and watch the pinned post videos, ask questions, etc. https://www.facebook.com/groups/cs6000i/

https://www.facebook.com/groups/cs6000i/

Yes, call the local dealer. He will probably charge you too much to look at it. Moses

you may have to lower your needle just a "tad". loosen the screw that holds the needle to lower it.

Computerized sewing machines are not to be oiled.

The lubricant is factory sealed and any additional lubrication is to be done by a sewing machine tech that is certified to work on your particular brand of computerized sewing machines.

The maintenance section of the manual for your machine will indicate how to clean the machine.

Be sure the needle is at it's highest position when removing and replacing the bobbin case.

hello,the E1 code simply means the machine is working so hard,you can follow the information below to help you fix the problem,

The instructions for bobbin winding tell you to click the start button for the bobbin to wind. When you do that you get that E1 with a beeping. What they don't explain is that in order to press that "UP" arrow button to get the bobbin to wind..........you need to UNPLUG the foot control. So, in other words it to be used for sewing w/o a foot pedal. Now instead of doing as per instructions, assuming you've plugged everything in (foot pedal), after winding is finished just press the foot pedal and your off and running or sewing as the case may be. BTW, look it up in the TROUBLESHOOTING SECTION OF YOUR MANUAL.
please kindly rate the solution if it;s helpful,

take care.

The only way I know is a 110/220 volt transformer. They are available in any electronics supply house. As I remember the motors in these machines are only two lead, and they put the motor in for the country it will be sold in. Dual voltage motors have three or four leads (wires).