20 Most Recent Xerox Phaser 8860MFP Printer - Page 8 Questions & Answers

This option does not need to be changed unless you are getting a overheat error. If you lower the heat on the fuser this can result in image transfer on the paper leaving blotches and ruining the fuser.

This is a driver issue. You may want to try the PCL driver (or use the Xerox Global driver). Download the latest driver for your operating system at www.xerox.com. Either delete the printer and reinstall, or update the driver. Whichever is easiest for you.

try removing the fuser. restart the machine. place fuser back. If this doesn't work you'll need a new fuser. (Fuser is thing that get's warm on right side of the machine)

Go through troubleshooting by Googling the unit. Don't go switching stuff around before researching.

The available Windows 7 64 bit driver is VERY limited in functionality. You can find this information on www.xerox.com/support . Link to Windows 7 32/64 bit driver. http://www.support.xerox.com/support/phaser-3400/file-download/enus.html?operatingSystem=win7x64&fileLanguage=en&contentId=49291&from=downloads&viewArchived=false

You can find answers to your Xerox questions at www.xerox.com/support . Solution : Power Off the Printer, Wait 45 Seconds, Then Power On the Printer Some problems can be resolved by powering the printer OFF and ON. WARNING: Only use the power switch on the printer to power the printer OFF and ON. Damage may occur to the printer if power is interrupted by other means. CAUTION: When cycling power on the printer, any incomplete jobs in the queue will be lost and will have to be resent.

1. Power OFF the printer using the power switch located on the top, right side of the Control Panel.
2. Wait approximately 45 seconds, then power ON the printer.

THAT COULD BE A CNSUMABLE