20 Most Recent Xerox Phaser 8860MFP Printer - Page 5 Questions & Answers

Hi Anonymous, I suspect you must have solved this one by now. I can only assume you have something jamed inside. (your thoughts too I expect) I would have thought removing as many panels as you could to gain access to the drawer unit to add paper might reveal where the problem might be! Good Luck.

Hi Anonymous, I suspect you should have this problem sorted by now. Looking at the Xerox website says that a replacement printer is available for around £190 that could have worked out cheaper that trying to get this one repaired. Replacement Xerox 6500 Good Luck.

It's referring to a particular sensor I suspect. More investigation needed. Good Luck.

This is usually the print heads are not working correctly. Either purge forever and the problem might go away, or call in Xerox. Good Luck.

Sorry, Anonymous can't help you with that one! Good Luck.

go into printer properties ( in the computer printer section and find the tray tab adjust to what you want , apply and save

Laser printers in general are not extremely good at photos. You may be able to increase the contact sheet picture size. If you've not already set "best quality" mode, try that.

If memory serves, go into the service panet and check out the sensors. As you open the panels each sensor logs each activation. Good luck.

Unfortunately, your sensor failure will require a replacement from a Xerox technician. You will have to call Xerox or the company you purchased the equipment from to get this resolved. best way to describe it would be to compare to a cars engine, if your starter fails to work the engine won't run, same for your Xerox device the sensor tells the engine to run.... :o( This is a major hardware failure on your device.

It's a bit since I last saw this problem. I would need a lot more detail to get to the bottom of your problem. if you have been able to print out the Vignettes before then you can eliminate software, firmware & print driver. You might have a problem with the laser units, black/cyan or magenta/yellow, the window underneath could be dirty. If all this is a bit too daunting then you got to get hold of Xerox. Sorry, Goodluck.

Best to go straight to WWW.xerox.com and look for your model of printer. Good luck.