20 Most Recent Epson Stylus Multifunction Inkjet Printer/ Copier/ Scanner - Page 2 Questions & Answers

the bluetooth dongle for your printer is sold separately. call epson store to get one.

Hello!
Have you tried www.epson.com or if no luck there try my favourite site www.cnet.com if it isn't there there will be a link, Cnet's never failed me.
Press the blue button if satisfied with my Free effort, Thank You!
Paul 'W' U.K.

Fiend your solution direct from EPSON. Here is your solution...

http://www.epson.com/printer/prob676ijt65/solution

takiqq23

The cartridge may be defective, as I seen this numerous times, try buying another cartridge from a diffrent retailer and make sure the tape is removed before installing the cartridge.
If this works, you can contact Epson if it is there OEM cartridge that is defective for a refund or replacement.
Good Luck.

Hey,

Drivers for your epson are available on the epson support pages here, http://esupport.epson-europe.com/ProductHome.aspx?lng=en-GB&data=YZnBT5wk60YR4zWUxGANfgIoGj5U0I8I&tc=6
I assumed that your using windows xp, drivers for other versions of windows are also available on the website.

Thanks,
Ekse

Remove ink cartridges one by one and put it back in. If same thing happens, try to do head cleaning and nozzle checks consecutively from the computer.

Start -> Control Panel -> Printers & Faxes (Windows XP) / Printers (Windows Vista) -> Printer Icon (right click) -> Printing Preferences -> Maintenance

You should be able to see nozzle check, click it and follow the prompt. Line patterns that corresponds to the colors of the ink cartridges would be printed. If breaks on the patterns appear, continue with head cleaning. Try to do this about 3 times until all patterns are complete.

http://www.epson.com.ph/products/printers/inkjet/EPSON_Stylus_C90.shtml

clik in Download Drivers, chose your operating system, clik acept and save file.

You are a ******* and I WILL NEVER BUY A PIECE OF **** EPSON AGAIN...THESE PRINTERS ****

You need to open up the maintenance window and go thru the motions that you are changing the cartridges and this resets the ink levels back to full and sends data to the printer saying that they are full and the ink light disappears and it prints fine !!!

Just changing them doesn't seem to do the trick like on a lot of printers

http://support.epson-europe.com/onlineguides/en/sx600series/html_z/p03.htm

this is the web site that explains how to connect to the network. i hope this helps.

please rate good. If you need further help, reach me via phone at https://www.6ya.com/expert/mark_445a24324be9eb03

Click on Epson, then Monitor status then Properties then replacement. A page will come up saying To get carriage into position click O.K. on this page. When you do that the carriage moves into position and you can take out the old cartridges and replace them

pree menu on the printer > go to maintenance > go to ink cartridge > press ok > open the lid > the cartridge will be in installing position, pull and relaese the lock > pull the cartridge u want to change using the clip provided. > undo the plastic pack of the new cartridge, tear open the vaccum pack, pull out the yellow tape > keep the cartrigdge on the hoder straight and gently press the top until u hear it click ! !!

Try opening the printer properties then selecting Printing Preferences -> Maintenance -> Epson Status Monitor.
This will give you an indication of whether the cartridges have been recognised.
Some of the older T071x cartridges are not compatible - you must get ones specific to to SX200.
D

i had the same problem and checked for paper jam but wasnt any so i kept turning on the printer while looking in side and found that one of the little white cogs where the ink box rests wasnt catching when i pushed it into place the printer set itself and started working maybe you could try this. good luck.

I was having the same problem. This fixed it:

Lift up the scanner bed (top part) of the printer to expose the cartridges.

Push the red triangle button once. Wait for the cartridge carrier to move to the middle. On the housing of the printer (the non-moving part), there is an arrow that will point to the empty cartridge.

Push the red triangle button again to see if the next cartridge is empty. Repeat this step, noting which cartridges are empty, until the cartridge carrier moves to the right. Now you can replace each cartridge that is empty.

After replacing the empty cartridges, push the red triangle button again, and the carrier will begin moving back and forth (cleaning itself). Once it stops, it should be positioned on the far right side.

Lower the scanner bed to "close" the printer. The ink light should go off and you should be able to print.

i had the same problem as this.

the manuel told me to put the ink in the printer before i had installed it, this however seems impossible.

instal your printer first. when it is instaled go to printer settings, then click on maintenance, then click on the option that says ink cartridge replacement. Follow the instructions and this will bring the cartridge to the change position!!

failing this you can unplug your printer quickly after you turn it on when the cartridges move, then you can manualy move into position. Not sure how good for your printer this is, but it works.

Did you check the thickness? My printer won't feed paper that's to think or thick properly it sould say in the manual what thickness of paper you should use.

Try downloading manuals & guides from the Epson Support site:
http://esupport.epson-europe.com/SupportHome.aspx?lng=en-GB&data=0ccCGROWIYM58zV3pqc84YT0DcLI1RrpNUFXBv299cYU003D

Please take a moment to rate this solution. Thanks.

You could try here:
http://www.2manuals.com/product_reviews_info.php?products_id=792&reviews_id=150

hi.make sure there is no tape or dirt on cartridge chip contacts.if still no joy trying iserting one cartridge at a time then installing.say insert black then will say others carts missing red blue yellow.keep going till they are installed.sometimes helps.make sure the carts have lastest chips installed version 5 or higher if compatable cart.should not be a problem if bought from epson.eg t711 etc will fit but must be new carts with new chip otherwise may not accept.i belive the sx100 has something like t811 or something.this may be the new chip.otherwise may just be a faulty chip on the cart.you can get refillable carts or ciss system on ebay you put in your own ink.they are brillant.cart chips reset when low ink.hope this may help.