20 Most Recent
HP Laserjet M2727nf Multifunction Printer - Page 2 Questions & Answers
How do you reset this printer?
Based on the history of this printer series, likley this unit is a boat anchor. The reliability was so poor that HP started replacing these under warranty when they failed with a different unit because they could not guarantee that spare parts would last.
Error 20.0000
Hi
This code id insufficient memory so it means the documnent is to big for the installed memory or the memory is faulty
Cliff Cook
Scanner error 5
Scanner 5 error is a terminal failure of the formatter board, which often destroys the scanner drive motor as well. Based on the price of replacement machines, I would not waste my time with this if I were you. Near the end of the life of the 2727 HP was offering a replacement unit in a different model because they were not confident about the replacement formatters they were selling or providing for warranty.
Error code 5 printer will not work on net work
Error code 5 is a failed scanner. This failure is covered by an extended service advisory, which means they will replace the scanner at no charge to you as long as your printer was manufactured before January 1, 2010. You can look on the back of the printer at the serial number plate for the date of manufacture. Contact HP at 1-800 HPINVENT
M2727 will not initialize.
You have to be a little bit more specific next time, we have 2 possible scenarios:
A) The printer freezes at the HP LOGO
B) Blank display / No display
Both are usualy caused by a problem in the formatter (Mainboard) . There is nothing you can do to recover it. If the printer is still under warranty you will need to call HP (1 800 334 51 44) or take the printer to an athorized warranty depot in your area. This link will help.
http://h20465.www2.hp.com/GPL/search.aspx?language_code=en&country_code=us&SearchType=SSP
I can tell for sure that the warranty for this specific model M2727 will be extended 1 extra year (means you have 2 years coverage) if the printer has one of the issues listed above
I Hope this can help
You can contact me directly on :
[email protected]
Our HP M2727 nf multifunction fax machine locks up
Restoring the factory-set defaults returns all of the settings to the factory defaults, and it also clears the
fax header name, phone number, speed dials, and any stored faxes in the product memory.
CAUTION: This procedure also clears all fax numbers and names that are associated with one-touch
keys and speed-dial codes, and deletes any pages that are stored in the memory. The procedure then
automatically restarts the product.
1. On the product control panel, press Setup.
2. Use the arrows buttons to select Service, and then press OK.
3. Use the arrows buttons to select Restore defaults, and then press OK.
The product automatically restarts.
HP 2727 scans first page as letter size and all
Solution found: Change the scan default format to Tiff, but then save the document as PDF on the workstation. We think this is a newly discovered but unintended feature of the newest hp scanner software package.
Not finding what you are looking for?