Top 20 Brother MFC-9440CN Laser Printer Questions & Answers

check out these solutions for the same problem Brother MFC 9449CN CC3 205 03031f04 error message Scanner is unable to...

I spend a few minutes on google and quickly found a place that provides service manuals for brother printers. I suggest you do some research like this on google and you tube and you will find your answer there.

Call on Brother technical support number 1-800-243-0019 Toll free. And get Instant support for your Brother Printer from our Brother tech support team?

A combination of key press and powering-on should clear the error log which will let your printer work normally

The most common remedy is to clean the drum unit, but you have replaced that. Try cleaning the corona wires, p144 here http://www.manualsprinter.com/manuals/brother/Brother_MFC-9440CN.pdf

not sure if your on copy mode or print mode ..close the MP tray door....turn off then on go to general setup select tray 1. not sure if your on copu mode or print the machine wants you to add paper to the tray that needs it. if you add paper dowes it still say"add paper" .if this is the case then the tray sensor is 1)broke2) pushed out of the way folded3) tray feed roller are not installed correctly no allowing sensor ..make sure your printer settings(properties) are set the that tray.

Samsung Customer Phone Number Shortest Wait Best Support the customer support phone number is: 800 -726 -7864 Press 1, then 1, then 1, then 1 Average Wait: 15 mins - Mon - Fri: 7am - 9pm (CST) Sat : 9am - 6pm (CST) good luck

i need more info .is it a OEM brother cartrdsge or and aftermarket generic or a refill??

NON-Technical answer...this machine has four drums(connected) and four toners. the magenta appears to be the problem ... I would first take out the magenta toner..make sure you have a cloth and something to catch the mess. see if anything (crum,dust bunny,paperclip,etc)is in that area. if it very dirty, replace the magenta first( using generic??). open plastic cover in front where the toner was seated and move the green bar back and forth .close that back up. test it. it gets expensive after this and you should call a tech. before you throw money at a problem.

Throw that piece of garbage out and get an HP or Samsung. One of these has plagued my office for years and I've spent countless hours plotting its demise. Worse than useless: unreliable.

open the cover press start press00 done

your toner sensor is inside your printer, why you need to cover that up?

driver error by the sounds. download the latest driver and re-install the macine

need to clean scanner lamp or mirror if you dont have any experience take one shop and check it

That must make the players on the footie teams you ref for really happy.

change the black cartridge if need be and program printer to only print black using printer/devices preferences tab. try.

WASTE TONER SENSOR FAILUREclean the waste toner near/full sensor assy if still the same then you have to replace it.

Press buttons 3 and 9 at the same time in the ready state, the RESET MENU/DRUM will appear on the LCD. Resetting the purge counter is not included, Just to give you an idea.

clean the paper path and the drum first