Top 20 GE 25952EE1 Cordless Phone Questions & Answers

Press and hold the skip button for two seconds. The system announces "SELECCIANDO ESPANOL". Press and hold the skip button again for two seconds. The system announces "ENGLISH IS SELECTED".If you need a manual, you may download a copy here. The language instructions are in the "Answering System Setup" section in the fifth column.

Press and hold the announce button on the base. Record your message at the beep. Release the button when down.

You can download the manual at
http://www.home-electronics.net/USER-GUIDES/25952_DOM_EN_CL_IB.pdf

Hello there,

The specification for the GE 25952EE1 5.8 GHz Cordless Phone ac adapter is
INPUT AC 100-240V 50/60Hz
OUTPUT AC 9.6V----1A

Thank you for using fixya
Caseytech

Hi,

1) The flashing "0" indiactes the total number of messages. (In this case it is zero messages)

2) The flashing "CL" indicates that the voice time/day stamp needs to be set.

To reactivate the answering system, kindly set the voice time/day stamp.

If you have the instruction manual, please follow the steps given in the manual to set the voice time/day stamp.

If you do not have the manual, kindly let me know so that I can provide you with the steps. Click here to reply.

Hope this solves your problem. Thanks for using FixYa.

Try putting new batteries in the handset. Many phones will dim their displays when the batteries start to run low in order to save power.

Hope that helps!

Usual charging time of phones are within 2-4 Hours. Charging time varies depending on the charges left on the battery of the unit.

Should you have any other questions just please leave a comment.


Cheers~
Musicaddict

Hi, i think the problem is the LCD screen, you can go to the service area and ask it to be replace with another LCD of your phone which is the best way to fix it. You can only solve the problem by changing the LCD screen since you have changed the battery and it is still faded..

Take care

Hi,

You can download and print the instruction manual in PDF format by clicking this link:

http://www.home-electronics.net/ge/pc/IB/25952EE1_IB.pdf

You'll require Adobe PDF Reader installed on your computer to view the manual. If it is not already installed on your computer, download it free from: http://get.adobe.com/reader/

Thanks for using FixYa.

Hi,

You can download and print the instruction manual (English) in PDF format by clicking this link.

You'll require Adobe PDF Reader installed on your computer to view the manual. If it is not already installed on your computer, download it free from: http://get.adobe.com/reader/

Hope this solves your problem. Thanks for using FixYa.

The phone must have a ringer ON/OFF switch. ... the phone begins to make the ringing sound, repeatedly press the Volume Down button until "RINGER VOL: OFF" is displayed

http://www.home-electronics.net/USER-GUIDES/25952_DOM_EN_CL_IB.pdf

just copy your data from memory card to pc. then format your memory card. put it to phone thats all.
[email protected]

The manual, which can be found at: http://www.home-electronics.net/ge/pc/IB/25952EE1_IB.pdf, reads:
4. Place the handset in the base cradle. The charge/in use indicator turns on,
verifying the battery is charging. The unit will take 20 seconds to register
and verify its security code. READY shows in the display.
NOTE: In case of a power failure, the handsets may display
UNAVAILABLE when the TALK/CALL BACK button is pressed.
You must then place all handsets on the main base cradle
for 20 seconds to re-register.
That should reset your handsets. Hope this helps :) Thank you very much.

Go to London Drugs and they have a good selection. But check the price of new phones first.

Hope this helps:

Voice Time/Day Stamp
1. Make sure the answering system is ON.
2. Press and hold the day/check button on the base to set the day of the week.
3. Press and hold the hour button on the base to set the hour (a.m. or p.m.). Example: 12AM, 1AM, or 12PM, 1PM.
4. Press and hold the min button on the base to set the minute. The time advances in 5-minute intervals, or tap and release to advance in 1 minute intervals.
Speaker Volume
Use the speaker volume (- / +) buttons to adjust speaker volume on the

Remove the battery, wipe the phone contacts and battery contacts with a dry cloth, then reinsert the batteries and check to see if the charge lasts longer. If there's no improvement, it's time for new batteries.

just take out the connection

the screens broke

you just need to set them in the main base for a few seconds

Press FLASH button to display ANSWER REMOTE

Press EXIT/TONE button

Enter your new 3-digit code

Press EXIT/TONE again