20 Most Recent Uniden DECT 2080-5 Quint Phone - Page 7 Questions & Answers

You can't

Is the memory filled up? Delete old messages you don't need and try again

If your Uniden product is not performing to your expectations, please try these simple steps. If you are still unable to resolve the problems, please contact Uniden Customer Service for assistance. CHARGING/POWER

Charge light won't come on when Handset is placed in the Base Unit?

There are no lights on the Base Unit?

The telephone only operated after the first time the handset was charged?

The batteries do not work in my new cordless phone?

The charging light colour does not change when the batteries are fully charged?

Should I leave the handset back on the base after the batteries are fully recharged?

The handset beeps?

AUDIO QUALITY

Audio sounds weak and/or scratchy. Interference is evident on my analogue phone?

Interference is evident on my digital phone?

Only continuous static is heard from the Handset and the phone will not turn off?

The handset and base make a humming noise?

NO CALLS

Can't make or receive calls. There is no dial tone?

RINGING

Handset does not ring or receive a page?

The Base Unit does not ring?

CALLER ID

How do I activate caller ID?

How can I access call waiting?

Call waiting is not working?

GENERAL OPERATION

Range is limited?

The answering machine is not answering calls?

Telephone banking is not working?

How do I extend the number of rings?

The clock on the answering machine looses time?

I cannot record an outgoing message?

How do you store phone numbers to memory?

Will my phone work overseas?

What do I do if my phone gets wet?

The earpiece volume is not loud enough?

The ringer volume is not loud enough?

What is the model number?

it means the disk is damaged otherwise you have a software problem and not a hardware problemsee:https://inro.in/hola-vpn/https://inro.in/private-internet-access/https://inro.in/tunnelbear/

Hello, Kenneth - The user manual for the Uniden corded / cordless telephone model D3098 can be found here: https://teltex.com/content/userguides/Uniden-D3098-User-Guide.pdf (PDF document, Adobe Acrobat Reader software needed to download and save to a computer - software is free) Instructions for the Answering System begin on Page 21. If you need more assistance, the Customer Care phone number can be found on Page 1. Best wishes.

try dialing in #43# into handset while dial tone heard

Hello Miriam Taylor, Listening to the message should be sufficient. Mine wasn't a real message... I fat fingered the base trying to INTERCOM to my wife's remote. As I never intended to use my system as an answering machine... I deleted it too... If you look really closely at the 1,2,4 & 5 key on the touch pad of each wireless remote the (play) right arrow seen on the base is adjacent to the 2 key... Press it... Delete will be an OPTION above the SOFT keys associated with the menu words on your display... (off & message gone). Then made sure MY ANSWER FEATURE was "OFF". You will have to read the manual... (RTM, below). Message access can be accomplished three ways... at the Base, at any cordless station... and (off premises) remotely from anywhere in the telephone network. Hope this helps... ELSE RTM. My favorite site for FREE manuals is manualslib (MUST provide actual model numbers) No exact matches found Try these results Uniden DECT 6015 Owner Manual Amazon com Uniden DECT 6 0 cordless phone Office Products Carnac the Magnificent

Check manual from manufacturer. It requires a model number to obtain it. http://www.uniden.info/download/ http://www.uniden.info/download

no but it helps if there is a charge in the battery

Try contacting the manufacturer. You can look on Amazon or eBay too.

no the hand sets are registered in the base set for the first hand set they can be used as an intercom Read the user manual or down load one from the uniden web site It is a pdf version search --user manual for uniden dect 1635 WH phone

call uniden but it should be you have to run the base station cable through the nbn modem for it to work

Ringer is turned off.

press menu scroll to phone settings press menu scroll down to ring time press menu scroll to most minutes press menu press end see if that does the trick or search --user manual for uniden phone model sse45 phone and down load the pdf version

depends on the country In Australia , receipt is proof of purchase date and registering with the company is not necessary the registration that is necessary is each hand piece to the unit base station and the user book tells you how to do that

try this press menu scroll down until you see global set up press menu scroll down to vmwi press menu scroll to yes press menu then press end save this as it happens a lot with nbn systems

Check if the base power adapter is warm to the touch. If it's cold, then the base has no power. Test if distance between the handsets and the base is an issue by moving closer to the base. Check for any radio interference. Check if the handsets are registered. You may need to de-register them first. Try unplugging the base (power and phone line cord) then remove the batteries from each handset. Wait at least 15 minutes before restoring the power/batteries. If the base has a charging cradle, place one handset in that cradle and wait a few minutes. See if that handset works. Otherwise, try to register one of the handsets and see if it works. If the problem persists, then the base probably has a problem transmitting or receiving the signals from the handsets. Unless the system is under warranty (one year), you should replace the system. Otherwise, contact Uniden customer support. I hope this helps. Please add a comment with the model of the Uniden phone if you want directions for registering/de-registering the handsets. Cindy Wells

press talk button or press menu and settings and press answer on pickup -menu and end

You should be able to set the Uniden answering system to Off. There are exceptions. The answering system will automatically turn on if the Uniden system has Do Not Disturb or Silent mode enabled. To check for the DND mode, look for a DND button on the base. Press and hold the button to toggle the feature off. For the Silent mode, look for the # symbol (below 9) or a Silent button on the handset and press and hold the button. Then either turn off the answering system using the button on the base or go through the menu to turn it off. To use the menu system, make sure that the phone (all handsets) system is in standby mode. Press Menu and use the arrow keys to navigate to Ans. System (or Ans. Setup). Press Select and look through the menu for a line that has Ans On/Off. Press Select and set this to Off. Press Select to Save. Press End/Clear several times to exit the menu. I hope this helps. Please add a comment with the Uniden phone system model number for specifics on where to find the Do Not Disturb or Silent buttons and the Answering system setup. Cindy Wells