20 Most Recent
Uniden DECT 2080-5 Quint Phone - Page 5 Questions & Answers
HOW do l set up answering machine message on Uniden XDECT 8315 home phone
The Uniden XDECT 8315 does not have an answering machine. It will check your voice mail. Setting that greeting depends on your telephone service provider. Check your provider's voice mail FAQ.
To have your XDECT 8315 get your voive mail messages, press Message and then select Voice Mail. Then follow the prompts to enter your voice mail access number. Alternatively, you can press Menu > Global Menu Settings > Edit Voice Mail. See pages 17 and 32 of the manual. (See the link below.)
The manual for the XDECT 8315 is available on the product page:
https://uniden.com.au/product/xdect-8315-1/ . The current link to the manual is
https://uniden.com.au/wp-content/uploads/2017/06/XDECT_83151_OM.pdf .
If you do not have voice mail from your telephone company, you can add a stand-alone answering machine. Just make sure to connect the answering machine to the telephone jack. Then connect the answering machine RJ-11 out to the telephone's RJ-11 jack on the base.
I hope this helps.
Cindy Wells
My uniden DECT 6.0 telephone when plugged in constantly rings. I can't find anything in the manual on how to fix this.
The problem sounds like a wiring fault to me. Landlines ring when the POTS (plain old telephone system) provides power on the receive wire. See
https://www.lanshack.com/wire_phone_jack.aspx for the RJ-11 wiring diagram.
Try a different phone at the jack and a different telephone cord. If it rings constantly, that tells you the problem is with the wiring in the building or outside. You need to find where additional electricity is coming into the telephone wiring. Check the jack first. Most jacks either have screw terminals or keystones. Use the wiring diagram above to make sure that the wires are connected to the correct point. If you have the screw type of terminal, you need to strip the insulation from the conductors before securing the wires. For the keystones, leave the insulation intact. Then use a punch-down tool (available at most hardware stores in the electrical section) to push the wire into the correct slot in the keystone.
There must be a place where the insulation is damaged and touching another wire or water is in contact with bare metal and a current is flowing across the water. If only the Uniden phone rings constantly even with the new RJ-11 cable, replace the phone.
I hope this helps.
Cindy Wells
Setting time & date for uniden home phone exs9500 serial # 94028608
The directions to set the date and time on the Uniden EXS9500 are shown in the manual starting on page 21. Press and hold the Clock button (the second button from the left below the answering system buttons) on the base until you hear a beep. Use the Skip/Repeat buttons (the two end buttons of the answering system buttons) to select the current day of the week. The LCD with show 0 through 6 and the voice prompt will list the day of the week. Press Clock when the correct day of the week is announced. Use the Skip/Repeat buttons to select the current hour (1-12). Press Clock to set the hour. Use the Skip/Repeat buttons to select the current minutes and press Clock to save the setting. Use the Skip/Repeat buttons to select AM/PM and press Clock to save the current time and exit the clock setting menu.
ManualsLib has the directions starting here:
https://www.manualslib.com/manual/334436/Uniden-Exs9500.html?page=21#manual .
I hope this helps.
Cindy Wells
Uniden cordless phone visual ringer keeps blinking
It is the indicator that you have a voice mail (answering service that comes with your phone provider. Contact them to tell you how to access it.
to access iprimus voice mail, dial your own number it will then ask for your PIN, if you have not set this up the default number is your area code ie. 02 Sydney 03 Melbourne etc. and the last 2 numbers of your phone number
Not finding what you are looking for?