20 Most Recent RIM BlackBerry Curve 8310 Smartphone - Page 9 Questions & Answers

Try to reset your blackberry password by entering wrong password 10 times, it will make your blackberry curve 8310 unlocked as well as your previous data will be erased. After your blackberry unlocked, you can setup new password for your phone.

Chances are it's just clogged with dirt

Ok. Follow this carefully cause more people break and destroy their trackballs by not following directions step by step

Carefully pry the grommet (ring around the trackball) off and set it aside. If you look at it. There is supposed to be only 3 pins. NOT 4 so if you have 3 your fine.

Carefully tip the phone over and tap it if you have to, to get the track ball to fall into your hand.
Then I suggest taking a cotton swab, and some alcohol, dip the swab.

Then run it all over the ball as you move the ball in all directions and free up what ever is in there, ie; dirt, dust, stuff from your hands...

Once the track ball can move in the down position or in a complete circle without any problems. Let it dry for like 5min.

Drop it back in carefully. Direction of the trackball doesn't matter. Then carefully put the grommet back in the exact way it came out.

Then it should work just fine.

I've used alcohol to clean mine many many times and never had a problem. Alcohol is different that water, it evaporates and doesn't leave a film or damage.

I hope that helps.

Options > Security options / General settings / Menu / wipe handheld / "Blackberry"(without quotes)
Then the phone will shut off and the hourglass will come on as the phones resetting...

That's the simplest way to do it.

Thank you

If your plan has data, you need to call your carrier and have them provide you with the APN (access point name) and how to enter it into the phone.

The APN is the web address the phone connects to their data servers with. They should have set that up for you when you bought the phone.

Anyways. that's how ya do it. And if they still won't help you. Get a hold of me through here, and I'll get ya hooked up..

Thank you

You can put them on an SD Card then when you plug the phone into the computer don't use Desktop Manager and let the computer see it as a flash drive,

Or.

You can just email them to yourself and save them on your computer at home,

I usually do that personally. And leave the email cause then if anything happens to my phone or computer, I know there's a copy in my email.

If you're getting an error saying "Invalid SIM Card" or "Incorrect SIM Card" then the you would need the unique unlock code for the phone.

Unlock AT&T Blackberry 8310



Unlock AT&T Blackberry 8310

Get the unique and say way of unlocking your Blackberry Curve 8310 on Rogers


Unlock Rogers Blackberry Curve 8310



Unlock Rogers Blackberry Curve 8310

It could be a couple of things. If you have a media card inserted in your device, then it might be a bad media card. A couple of things you should try to fix this are to make sure your Blackberry Desktop manager is up to date. I believe the check for updates link is in the help menu.

The other thing to try is editing the media on your phone directly. Plug the phone into the computer, then click on "my computer" on your desktop. Your phone should show as one of the drives on that screen, and your media card if you have one as a second drive. Open whichever one you want to work with and go to the music folder. You should be able to drag and drop the songs you want into the folder and delete the ones you don't want etc.

Generally your service provider will offer tech support even for problems like this. If you can't solve this yourself, then try calling them. If they can't fix it, try calling RIM tech support, they're quite easy to deal with.

Is there a blackberry symbol near your wireless signal strength indicator (top right corner of home screen)? If the blackberry symbol is there, then you are connected to the RIM network, just don't have an internet connection from your service provider, or it is blocked by your BES network administrator if you are on a work phone.

If you are paying your service provider for data access, then you should contact them as it is likely a problem with your account. If you are on a work device, then you should contact your IT department as either the internet is disabled on their devices, or there is a problem with the settings relating to your device.

If messages are still going through fine for email and BBM, then it isn't a problem with your phone, but with whatever service it is connected to.

not possible for free unlock code,get it here for less cost
http://www.onlinegsmunlock.com/

My phone was doing the same thing. I woke up in the morning to see that is wasn't charging from any outlet or my USB.

I instead concentrated on the USB opening on my phone, and realized that one of the pins was so ever slightly moved up. I took a safetly pin and gently kept bending it back down. Now it charges. Good luck and hope that helps! Just something different from the warranty/flashthrow away solution.

KP

It is better change the battery first,know if the phone runs in good condition as well as it charged after a low battery level, when the phone still got the same problem,your phone might be shorted were the value of resistance is double using a multi tester. To test if your phone is grounded,you need a multi tester and range the selector to Rx1 * tap the positive pin in the positive battery terminal of the board as well as the negative pin into the negative battery terminal too,the meter should raise up. * now tap the negative pin of the tester into the positive battery terminal and the positive pin into the negative battery terminal,if the rate is 0 it means the phone is good,but if raises high,it means the phone is grounded and had a power supply problem.in this case,bring the phone to a mobile service center for a complete diagnosis and troubleshooting.

Alright, I just had this problem. I dont know how this happened, but some settings were changed. If you go to media and press the menu button then go to options. Now change device memory limit to 15mb and reserved picture memory to 2mb. Now try your camera, it worked for me.

Thank you for using fixYa

There is a problem with the phone OS

the most efficient fix would be to reload your OS

If possible do a back up of your phone and then reload the OS

here is a link with information on how to load the OS
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry

Hope the information is helpful

firstly change the display.even after is dont work then check the dispaly ic.

Hi,

To unlock your Blackberry 8350i, I would suggest Blackberry Unlocking Codes with IMEI. They are third party vendor and provide great customer service with COST EFFECTIVE and trusted codes. I travel a lot and got my unlocking code from them. Now I travel across the world without any worried and get all services on my phone without any problem.

If is a AT&T sim card. and you locked it. You will need a new sim card.Also any other carrier sim card you will also need a new sim card. That sim card that you locked is burn already and can't be use no more. You can get a new sim card for $5 bucks or free from your carrier.

i think it is a software issue try to reset the phone or update the software of your device if you dont know how let me know i can guide you ,

pls rate me well

Are you looking forward to unlock your Blackberry 8310 mobile to different network other than Airtel ?? Then you need to unlock it ,unlocking your mobile via codes is the best method to unlock the mobile , get the unlock code here & unlock it according to the service provider you need , to do so make use of the unlock code specified in this site http://www.mobileunlocksolutions.com/unlock-your-phone/rs1wp2/ & unlock it , i hope it will be very much helpful for you to use according to the network you reside ..

usually all blackberry phones with ball trackers experience this type of problem due to overuse

if you can fix it on your own,do it with care cause some parts are to sensitive.

* need a T6 screw driver

* open and unscrew all sides where the screws are located

* locate the track ball and dismantle it

* clean and align the board interface which the ball tracker is attach..

* assemble it with care....DONE

good luck....