20 Most Recent RIM Blackberry Curve 8300 - Page 5 Questions & Answers

there is no WIFI on a BB8300 only the 8310 and up model

it is something to do with the carrier you are using you should take the phone into an outlet in person and have them rectify the issues you are having.

you need to reflash you OS on to the phone...

you need to reflash you OS on to the phone...

you can connect the phone using the usb cable to the laptop/pc/mac that you are using then open your desktop manager (blackberry).....open apploader then click on software update and upload the OS back to the phone this should work...it has for every phone i fix that just have a red led blinking...also if the DM does not see your PIN, remove the battery from the phone then connect it again you should see BB PIN:UNKNOWN just click next and you should be good to go.

you should replaced the trackball

try cleaning the trackball roller pins or replace the trackball with a new one.

You need to connect the phone to your pc without the battery install and open up your blackberry desktop manager.....go to application loader and update the phone's OS , this should correct the problem :)

First, download and install the latest version of BlackBerry Desktop Manager software from: https://www.blackberry.com/Downloads/contactFormPreload.do?code=A8BAA56554F96369AB93E4F3BB068C22&dl=DA5FB46338C8C0DCB1039F7898184FC5

Once installed, connect your BlackBerry to your computer via the USB sync cable. Open Desktop Manager, and click the Application Loader. On the right, you will see Update your device software. Click the Start Button, and if your BlackBerry is not on the latest Handheld Software, an update will appear. Select the update, and run the install. Be sure to select the option that backs up and restores your data. Once started, do not shut down your computer, or disconnect the USB sync cable as this could damage the device.

Once completed, your BlackBerry will restart and you will have the latest version available. This version has been known to correct various issues.

If the issue is still present, then it could be hardware related, and may need to be repaired or replaced. I would then suggest contacting your Provider for Hardware Support.

Check out these videos on youtube - there are additional links on the right side.

http://www.fixya.com/support/r3771170-phone_water_damage

Most trackball movement problems can be rectified by cleaning the trackball. Try the following steps to see if it helps tp resolve the issue you are having;

1) Turn the unit off, open the back cover and pull the battery out,
2) Take a paper towel, dampen it with water...nothing else, making sure that the towel is only damp and not soaking wet,
3) Rub the damp paper towel on the trackball, over and over, making sure to rub up, down, side-to-side and every which way. This should clean the trackball and remove whatever is causing it to not move smoothly.
4) Wait a minute or two and replace the battery and cover. Once the unit has rebooted, try moving the trackball again. It should be better.

Cheers!

plz go to reliance center

please contact your service provider for the unlock code i.e from where you have purchased your handset,after you have got the code please follow the bellow mentioned step.

1) Turn all connections off ( to find this option select manage connection icon from the main menu)
2) select option icon
3) select advanced option
4) scroll down and select sim card option
5) type in MEPD
6) then type in MEP2 (when you type in MEPD and MEP2 you will not be able to see it on your screen)
7) then type the unlock code which you have received from your service provider
8) press enter

Remove the battery for a few minutes. Then reinsert and power on the device.

are you actually going to the menu button and selecting close on each screen or just hitting end or the return button to get to the home screen? If you don't actually select close in the menu screen some progams remain open. go into all applications when there press the menu key and scroll down to close this should help

The Blackberry Curve 8330 is used on CDMA networks which don't use SIM cards. Only GSM networks use SIM cards. The only reason certain CDMA phones have a sim card slot is for use outside of the USA only, those CDMA phones are Quad-Band.

The SIM card is used on the Blackberry Pearl. Look at the metal clip, it shows the direction to slide which will unlock and lock. Its a little stiff but it does slid and then swing up. Look at the battery and see if it is the same, but I don't believe it will work on the Pearl.

There's a possibility that the program is starting to get corrupted, that's why the keyboard is not responding correctly and the phone keeps freezing up.

Try to soft reset the phone:

1. Remove the battery from the back of the BlackBerry while it's turned ON.
2. Leave the battery out for 5 minutes then put it back on.
3. If same problem occurs, then contact the manufacturer for repair and possible wipe and reprogram for the phone.

Have a great day!

check ur battary or charger ...maybe they are not working properly

I HAD THE SAME PROBLEM .
TOOK ME ALL DAY TO FIGURE IT OUT
JUST TAKE OUT YOUR SIM CARD PLUG THE PHONE TO COMPUTER OPEN UP THE LOADER AND IT WILL START.DID YOU SAVE ANY PROGRAMS TO YOUR COMPUTER.MJODY39@YAHOO IF YOU NEED HELP

Check the manual