20 Most Recent 3Com Baseline Switch 2924-SFP Plus - Page 6 Questions & Answers

Google model number for manual,but no driver for such devices needed to work out

Please check the connections and the settings. Check on the cables, teh connecting links. Refer to the manual for the settings required. Also check with the provider for the default settings.

Hi

You do not say which operating system you use.

Press and hold the Router's Reset Button (sometimes you need a pen to push a Press Plate) at the rear of the Router.

This can be used to Restore the Router to Factory Settings, set the Router back to Default Username and Password (2-5 seconds) or, sometimes, clear the Username and Password for you to enter new ones (usually15-20 seconds), depending on how long you Press and Hold the Reset Button.

Alternatively:

Windows XP
Start > Run >ipconfig.exe > Enter, will reveal the IP Address of the router.

Windows Vista:
Start > type "command" in search box at bottom of Start Menu > click "Command Prompt" at top of Start Menu > type "ipconfig" after the C: \>

Windows 7:
Start > type "cmd" in the search box at bottom of Start Menu > click "cmd" at top of Start Menu > type "ipconfig" after the C:\>

Log onto the internet and type in the IP Address in your browser window and press enter. Access the Router Setup and follow the steps to configure it.

I hope this helps. If this Answer goes some way towards helping to resolve your Query, Problem or Fault, please take the time to Rate it. This helps Answerers, like me, better understand the needs and the point of view of Askers, like you, and guides us in exploring the best ways to provide the most useful, highest quality Responses we can. If you need further help, please do not hesitate to post another Question or add a Comment to this Question. Thanks for using FixYa.

This is probably a stupid way to solve it, but the factors of 84 are 2x2x3x7. 7x2=14 and 3x2=6. 14x6=84.

I don't remember how to work out X x (X+8) = 84 and solve for X.

Carl

The commands are different than a Cisco device. Rather than try to list all the commands in this solution I'm providing you a link to the products support page on the HP website (HP bought 3Com a while back). The support site has the manuals, command reference guides, etc for your device. It should be everything you need to get started. Best of luck!

http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual&lang=en&cc=us&docIndexId=64179&taskId=101&prodTypeId=12883&prodSeriesId=4235691

As suggested previously, Please take manual backup of data folder of tally and reinstall the software.

Search the following documents for 'Password Recovery':
http://support.3com.com/infodeli/tools/switches/4500/s3n03_01_00sp01_readme.pdf
http://support.3com.com/infodeli/tools/switches/4500/3Com_Switch_4500_Command_Reference_Guide.pdf
Both of these document discuss the password recovery process for this device.

Seems as though whoever installed your router set it to block those sites. You will have to connect straight to router with data cable and set it up again. What model is it? Try going to web site looking up model and find setup download: http://search.3com.com/search/en_US/query.html?qt=Setup&col=supp

OK. SPEAK ENGLISH. You have multiple ISP's? How many routers? How many subnets?

There a great article at General Router Setup.
If you need more help post back!
Thumbs and testimonial are welcome!