Nortel 2526T-PWR Ethernet Routing Switch with PoE - 24 x 10/100Base-TX LAN, 2 x 1000Base-T Uplink, 2... - Answered Questions & Fixed issues
How can I activate PoE
Try this: http://www.retrevo.com/support/Nortel-2526T-PWR-Switches-manual/id/8084dj990/t/2/
Good luck!
Switch not connect hyper terminal
If you are connecting to the switch using the console port using a console cable. Make sure your settings for hyper terminal are on COM1 and the baud rate is 9600.
If you are trying to telnet, you will need to assign an IP address to the VLAN in order to telnet into the switch and configure a password or it will not let you in.
How to config ip to
on the Nortel Passport sw
vlan x
ip address x.x.x.x
ip address netmask x.x.x.x
on the interface
ip address x.x.x.x
ip address netmask x.x.x.x
on the Baystack
it smilar to the cisco sw
pls try and tell me
Confi stack on nortel switch
Hi friend i want help can you give me the reply. i have 4 nortel 2550T-24 port switch but i don't know how to active stack config.
How do I unlock voicemail on a hand set?
Enter the admin mailbox (usually FEATURE 981). Follow the prompts to enter the mailbox change menu for the box you need to reset and select the "reset password" function. This unlocks the box and sets the password to 0000, which will then prompt the user to enter a new password when the mailbox is opened. Btw, I’m available to help over the phone in case u need at
https://www.6ya.com/expert/dave_fb2c45146b845cea
Turn off the auto attendant for the Nortel Phone
To turn off the auto attendant:
Press the program key. The display will indicate:
PLEASE SELECT
PNON ANSW OTHER
Press the key under ANSW. The display will indicate:
AUTO ATTND: ON
BACK CHANGE NEXT
Press the key under CHANGE. The display will indicate:
AUTO ATTND:OFF
BACK CHANGE NEXT
That's it. Now press the program key to finish. If you need more detailed instructions, please follow the user manual: Nortel pdf manual
Find IP adress
To find internal ip1. Click start-> run->cmd and press Enter
Command prompt dialog box will appear on the screen .
2.In that type ipconfig to view your ip address.
If you want to determine your external/WAN ip address visit
Ip-details.com
Not finding what you are looking for?