Top 20 Just Wireless Bluetooth Headset - BT-38 Questions & Answers


hi there. first switch on the bluetooth of your phone . then switch on the on button of your bluetooth device and keep it pressed for few seconds till the time the power lightgets on and now in your phone go to the option search new device .once ur phone detects the bt 38 name get it paired and it will start working

Just Wireless... | 187 views | 0 helpful votes


how to reset the pin number for bt 38k1

Just Wireless... | 122 views | 0 helpful votes


It obviously works, so it is NOT a fuse. The most likely cause is a poor antenna connection. This happens often. Unscrew the antenna. Use a continuity meter to check check each connector. Such as the one that screws into the radio, if the continuity meter "beeps" the connector is "grounded" and was installed improperly. Do not use that antenna until you fix it, you could blow the transmitter by using a "grounded" connector. Test it exactly the same way without the antenna attached. If you are not used to installing connectors, you could easily go through 2-6 before you get the hang of them.

Radio... | 223 views | 1 helpful votes


It is a direct entry scanner so just enter manual and program then enter the frequencies you want. Press enter after each channel and press program again to advance to the next channel and repeat.

Radio... | 41 views | 0 helpful votes


I don't think any of the above read the original complaint. The fact is that the person above and myself both tried the 0000 and the one two three four and several other such combinations, and none of them worked. The question is, what do we do now? What is the correct pin?

Radio... | 2,059 views | 0 helpful votes


sounds like a bad antenna or connection to it

Radio... | 25 views | 1 helpful votes


Contact Tait directly to inquire.

Radio... | 22 views | 0 helpful votes


Your radio have hardware problem, check 100 ohm resistance around your volume, may be its open cct. Also so if this circuit is working ,you pess squlech button and adjust volume, if you cannot adjust volume then definetly is my above written problem.

Radio... | 25 views | 1 helpful votes


Hello Larry, I have looked in the service manual of Marantz SR-1000, the circuit that makes the tuning indicator work and I found that there is one circuit for AM and another circuit for FM, which have in common, the FM selector key and A.M
My suggestion is, with Marantz unplugged from the power grid, try to clean the key with some contact cleaner and change the position of the key from FM to AM and vice versa, many times, to clean the contacts
After doing this, connect the Marantz again and check if it is tuned
I hope he manages to make the Sintonia indicator work
Greetings Franco Dosil
Hola Larry, he buscado en el manual de service de Marantz SR-1000, el circuito que hace trabajar al indicador de sintonia y encontre que hay un circuito para AM y otro circuito para FM, que tienen en comun, la llave selectora de FM y AM
Mi sugerencia es, con el Marantz desenchufado de la red electrica, que trate de limpiar la llave con algun limpiador de contactos y vaya cambiando la posicion de la llave de FM a AM y viceversa, muchas veces, para que se limpien los contactos
Despues de hacer esto, conecte nuevamente el Marantz y verifique si marca la sintonia
Espero que logre hacer funcionar al indicador de Sintonia
Saludos Franco Dosil

https://www.electronica-pt.com/esquema/func-download/30789/chk,3b686c096e97301a310a1ea24f94fa2d/no_html,1

Radio... | 24 views | 0 helpful votes


Your Mic problem, you repair the mic or change the headset.

Radio... | 25 views | 0 helpful votes


unmark PTT id, in above condition your transmission is working good, you can check if you have other radio by listening your message.

Radio... | 22 views | 0 helpful votes


Hello Ron, I sent you the link to download the user manual, there you will find the procedures for your concern
I hope you achieve your goals
Greetings Franco Dosil

Hola Ron, te envio el link para que descargues el manual de usuario, ahi encontraras los procedimientos para tu inquietud
Espero logres tus objetivos
Saludos Franco Dosil

http://manual.kenwood.com/files/B5A-0031-20.pdf

Radio... | 25 views | 0 helpful votes


Open programming of your radio, read it and see in programming help about Baud Rate, normally it is a speed of programming of your radio. If you can read/write with same rate then you no need to change it.

Radio... | 19 views | 0 helpful votes


I don't know the answer but if the audio isn't behaving as indicated in the vehicle handbook you should return to the dealer for an explanation or a fix as the car and the audio is clearly still under warranty.

Radio... | 22 views | 0 helpful votes

Not finding what you are looking for?
Just Wireless Bluetooth Headset - BT-38 Logo

Popular Tags

21 questions posted

Ask a Question

Usually answered in minutes!

Top Just Wireless Radio Communications Experts

Marvin
Marvin

Level 3 Expert

84619 Answers

robert

Level 3 Expert

2482 Answers

Don Eagan

Level 3 Expert

699 Answers

Are you a Just Wireless Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Just Wireless Radio Communications

  • Just Wireless Radio Communications

Most Popular Question

nt remember pin number pair bt 38k1

  • Radio Communications
Loading...