20 Most Recent Sony VPL-ES4 Projector - Page 2 Questions & Answers

tengo problema con mi proyector sony vpl-es4 me aparece una leyenda y me indica fuera de rango

Problem might be due to the air filters being blocked.
Remove the cover and check for dust accumulated on air filters. Remove the dust with a small paint brush.
Let us know the result.

And thank you for using FixYa!

Does it switch off with an error message or the lights indicating a problem. is the power saving feature switched on.
is the air filter cleaned.

hi,
Do one thing try to reset the lamp hour timer. for the same do the following.

Press the following keys on the remote in the following order for less than 5 seconds each.( on standby mode)

RESET then LEFT ARROW then RIGHT ARROW then ENTER

Remember on thing lamp reset is recommended only after replacing the lamp. if works try to replace the lamp as soon as possible.
ok

check that the lamp cover is not bent up slightly due to old age, and the little switch underneath is activated when the cover is installed

http://www.kavena.se/fileadmin/uploads/downloads/Sony/Projektorer/VPL-EX4/Protocol%20EX4.pdf
That's the link, to reset this unit, it seems you must hook, up with an RS232C cable, and "Talk" th the Projector, You simply hook up, using any terminal Program. such as, Hyperterminal. I think you need to get a manual.

http://www.nodevice.com/user_manual/sony/projectors1/vpl-es4.html
I looked but could only find, pay for links, for the service manual. You really need this if you own anything it is worth any money, as in it is the information, the the engineers that service them, use to troubleshoot and fix, special codes, and settings the lot. So it is a must have.

Have you replaced the lamp? If so did you reset the lamp timer?
If no to number 1 then you need to replace the lamp they are only good for 1000-1500 hrs then need to be replaced before the blow out all together.

circuit board fuse blown?

make sure the lamp door is closed securely. if the door doesn't/ can't trigget the door switch, you'll need to replace the door, or the switch.

get a life u fool

swap out cables and reset the settings to factory default.

The last user had placed the projector face down in its carry bag and the front lens had come off. This allowed the projector to display a round image on the screen and the 'menu' icon was not visable. Replaced the lens and it now works fine.
Thanks for your help.
Jerry

the lamp of the device may be going to end its life, need replacement.

Pl. send me solution. I am stuck with problem

vpl-es4 sony projector-frequency out of range.

Question edited for a lot more clarity. Great Question. Press Menu Button for 10 seconds.

Data Projector

Projector Central https://www.projectorcentral.com > pdf > projecto... PDF Normal: Displays the image on the center position of the projected image without changing the resolution of the input signal or enlarging the image. VPL-DX270/ ... 54 pages

How to unlock control keys on sony projector? - Fixya

Fixya https://www.fixya.com > ... > Sony Sep 13, 2018 - To unlock the main panel keys, press the MENU button for 10 seconds. Read full answer. Aug 05, 2011 • Sony VPL-CS7 Multimedia Projector.

VPL-DX220

pro.sony https://pro.sony > ue_US > pdf > vpl-dx220 PDF Efficient, easy-to-use projector for classrooms and meeting rooms: with excellent picture quality and low ownership costs. The VPL-DX220 XGA projector is a ...

Sony VPL-DX220 3LCD Projector Specs

Projector Central https://www.projectorcentral.com > Sony-VPL-DX220 Sony VPL-DX220 Projector ; MSRP: $740 (USD) ; Resolution; 1024x768 ; Aspect Ratio; 4:3 (XGA) ; Contrast; 3,000:1 (full on/off) ; Color Processing; 8-bit. ‎Highlights · ‎Specifications · ‎Compare to Competition

Sony vpl-es 5

How to unlock
Without remot

See the following manuals. It will resolve your issue. VPL-EW5/EX50/EX5/ES5 (sony.com) VPL-EW5/EX50/EX5/ES5 (sony.com)

Take into your local Sony Service Centre for diagnosis and replace the switch.