20 Most Recent NEC VT595 LCD Projector - Page 6 Questions & Answers

Try cleaning the filters, there is one on the front and one on the side. When dust builds up on these it can restrict the cooling of the projector

Just hold HELP button for 10-15 seconds and then press ON button to start up the video projector.

On the remote control of the projector, press and hold the HELP button for 10 seconds.

PROJECTOR. NEC VT491 THE STATUS LIGHT IS BLINKING 6 TIMES RED, AND THE POWER LIGHT IS ORANGE

My documented fix for this with pictures. Iris problem. http://dynamiccontrasterror.blogspot.sg/

Switch on the projector in standby mode. press the HOLD button on the remote for 10 secs. the projector will come out of protection and you are good to go! ensure that u replace a new lamp! This can be done only with the NEC remote!

Try this in Google: NEC E103e graphic equalizer manual

Ok, I realize this machine is already EOL, but if anyone else runs into this issue, I found the answer here.

1. Press the "Utility" button
2. Press the "Access" button
3. Press * four times
4. Press the "Maint" soft button on the touch screen
5. Press the "Service Mode" soft button on the touch screen

Once you are in there, you can reset the admin password by pressing the "Administrator # Initialize" soft button, and that will reset the admin password back to the default 00000000. Evidently, this works for a few other models of NEC copiers as well.

When the lamp exceeds 2100 hours of service, the projector cannot turn on have it checked out at the service center